01-03-2014, 11:51 PM | #1 |
Newbie Join Date: Jan 2014 Location: BC
Posts: 2
| Reverse lights
Recently I purchased a lighting kit with a module for signals and reverse lights. I hooked it up as per the instructions and the esc won't arm. Is there something I can do to get it to work? Or am I sol. Lights work. Esc works when it's not y'd through the light module. It is a scx10 crawler. Sv2 w/ hh torque master. Hitec hs5625mg. 10a cc bec. 2s lipo. Dx3c. Lights don't have a brand on them. It says "RC car LED SYSTEM" and "Austar Model" on it. The module is red and has 12 LEDs. Bec powers lights reciecer and servo. I have tried re working it so there is no servo being powered both with or without the bec. And the esc still beeps and flashes red green and yellow like it's not connected to the rx. Last edited by DanS; 01-04-2014 at 12:06 AM. |
Sponsored Links | |
01-03-2014, 11:56 PM | #2 |
Rock Crawler Join Date: Oct 2010 Location: Abbotsford BC
Posts: 522
| Re: Reverse lights
What kit? It may be drawing too much power. Depending on the lights you may need to hook it to your battery or BEC
|
01-04-2014, 12:15 AM | #3 |
Newbie Join Date: Jan 2014 Location: BC
Posts: 2
| Re: Reverse lights
I updated my original post with more details. I could test the module with another bec and different castle esc but I don't really want to disassemble my wraith.
|
Reverse lights - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Auto Hazard Lights with Brake, Reverse, Driving Light Controller | heyok | Vendors Electronics | 9 | 05-12-2017 05:42 AM |
novak eiger pro green led flashing in reverse No Reverse sometimes | burmis | Electronics | 2 | 05-22-2013 09:04 PM |
Reverse Backup Lights | Spiike | Newbie General | 13 | 02-27-2011 12:11 PM |
How to wire up reverse lights | venomous98 | General Scale Talk | 8 | 03-16-2009 09:55 PM |
esc's with brake/reverse lights? | TOYUTAH | Electronics | 6 | 01-18-2009 08:44 AM |
| |