RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Newbie General (http://www.rccrawler.com/forum/newbie-general/)
-   -   Whats a good motor for a wraith (http://www.rccrawler.com/forum/newbie-general/505480-whats-good-motor-wraith.html)

Midgi 08-18-2014 02:56 AM

Whats a good motor for a wraith
 
Hey guys when i got my brand new wraith after about 4 months my plugs were playing up so i took it out, then i put in my 27t honcho motor and it works great but i want something faster and that can crawl as well i run all standard electronics except and Hi tech servo Thanks all help appreciated.

robertjpjr 08-18-2014 07:01 AM

Re: Whats a good motor for a wraith
 
Use the same motor with a 3s battery and castle bec.

Midgi 08-18-2014 05:22 PM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by robertjpjr (Post 4867827)
Use the same motor with a 3s battery and castle bec.

I run 2s will that be enough or not

HDMM 08-18-2014 06:09 PM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by Midgi (Post 4868269)
I run 2s will that be enough or not

Not if you want it faster, you need to run 3s or change the motor. A 27 turn motor is only gonna go so fast, a Wraith comes with a 20t in RTR form. Another option would be to replace the motor / esc for more apropriate brushless system.

RaceMod 08-18-2014 06:21 PM

Re: Whats a good motor for a wraith
 
Try the stock 20t with 20/87 for pinion and spur, run it on 2s. This setup works great for me, but each to his own.

k7zpj 08-18-2014 06:56 PM

Re: Whats a good motor for a wraith
 
First thing you should do is read this thread if you haven't read it yet:
http://www.rccrawler.com/forum/axial...ing-added.html

If a brushed 27T isn't fast enough for you, you should switch to a sensored brushless system. A Castle MMP and a Tekin ROC 412 3100Kv is a good combo in the Wraith. You do need to have some money set aside to upgrade the transmission and drive shafts as this combo can be a part breaker.

Midgi 08-23-2014 05:12 AM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by k7zpj (Post 4868357)
First thing you should do is read this thread if you haven't read it yet:
http://www.rccrawler.com/forum/axial...ing-added.html

If a brushed 27T isn't fast enough for you, you should switch to a sensored brushless system. A Castle MMP and a Tekin ROC 412 3100Kv is a good combo in the Wraith. You do need to have some money set aside to upgrade the transmission and drive shafts as this combo can be a part breaker.

Kinda On the budget side of it but a traxxas brushless looks to good to pass

Wade 08-23-2014 07:17 AM

Re: Whats a good motor for a wraith
 
The traxxas system will be fine for top end speed, but will cog like crazy when crawling because it isn't a sensored system

Cheers
Wade

sic1to 08-23-2014 03:28 PM

Re: Whats a good motor for a wraith
 
Holmes Hobbies 13t $35.99 on 2s is a lil faster than stock with tons more torque but on 3s it's a really good setup! Bec is needed if ya don't have one, the Ae-2 esc is very good actually.

Wade 08-23-2014 05:57 PM

Re: Whats a good motor for a wraith
 
^^^ And will be cheaper then a traxxas brushless and better IMO for speed AND crawling

Midgi 08-26-2014 04:41 AM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by sic1to (Post 4872811)
Holmes Hobbies 13t $35.99 on 2s is a lil faster than stock with tons more torque but on 3s it's a really good setup! Bec is needed if ya don't have one, the Ae-2 esc is very good actually.

So a 13t and 2s is a good speed and crawling combo and pinion and thanks

k7zpj 08-26-2014 11:08 AM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by Midgi (Post 4875216)
So a 13t and 2s is a good speed and crawling combo and pinion and thanks

Make sure you are looking at the CrawlMaster Sport 13T. It has a 5 slot armature so it is about the same speed as a 27T 3 slot arm.

There is a Torque Master Sport 13T, it is for Twin Hammers only. It will not work in a Wraith.

sic1to 08-27-2014 09:54 AM

Re: Whats a good motor for a wraith
 
Quote:

Originally Posted by k7zpj (Post 4875475)
Make sure you are looking at the CrawlMaster Sport 13T. It has a 5 slot armature so it is about the same speed as a 27T 3 slot arm.

There is a Torque Master Sport 13T, it is for Twin Hammers only. It will not work in a Wraith.

Actually there is a torque master sport 13t that will work in the wraith! Crawlmaster sport will have better startup & low end but I like the torque master in wraiths...I have both motors.


All times are GMT -6. The time now is 03:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com