Deadbolt body mounts

[Johan_Eriksson]

I got a green deadbolt body. The back mounting holes are closer together. What special body posts do I need for that? I don’t want to have to make 2 new holes.


Skickat från min iPhone med Tapatalk

[ThatJeeper2017]

Originally Posted by Johan_Eriksson

I got a green deadbolt body. The back mounting holes are closer together. What special body posts do I need for that? I don’t want to have to make 2 new holes.


Skickat från min iPhone med Tapatalk

Could you add pictures?





Sent from my iPhone using Tapatalk

[altd896]

No idea what truck your trying to fit that to but the SCX10 Deadbolt uses the stock AX80031-1 body posts in the rear same as front.

If your trying to fit to an SCX10.2 it looks like AX31391-2 is used for the rear posts on the Honcho version so they're probably the right posts for other SCX10 bodies onto the 10.2 also.

[Johan_Eriksson]

Atm I am using stock rails using stock shock hoops. Holes on the hood are wider then the ones up back on the fuel cell part. I will show picture later. It is a stock green deadbolt.


Skickat från min iPhone med Tapatalk

[Dustrbd1]

Is it the SCX10 Deadbolt or the AX10 Deadbolt. They have different mounts.

[Johan_Eriksson]

Originally Posted by Dustrbd1

Is it the SCX10 Deadbolt or the AX10 Deadbolt. They have different mounts.

How do I tell? I have to make something up cause it is not going to fit using regular hops with mounts.


Skickat från min iPhone med Tapatalk

[durok]

AX10 Deadbolt Chassis:



SCX10 Deadbolt Chassis:

[Johan_Eriksson]

Originally Posted by durok

AX10 Deadbolt Chassis:







SCX10 Deadbolt Chassis:

Scx10 ax10 ofcourse i can tell a difference that is 2 different trucks.i never said I didn’t know what truck I have. I am talking about a deadbolt body not chassis. I have a green deadbolt body and as far as i know it only came with the scx10 right. But if it didn’t I gues I have the ax10 version cause the pre drilled holes are only 56mm center to center and the scx10 shock hops have further distance.

Edit: NWM i never owned a scx10 but after checking spacing is 56mm on them to. So the body I have is for scx10. My issue was how this chassis I have mounted the hops. I have now made a temp fix until the one making this test chassis can figure out a better way to get it right.


Skickat från min iPhone med Tapatalk

[Dustrbd1]

I am glad you figured it out. They both have the same body but different mounting locations. That is why I asked.

Originally Posted by Johan_Eriksson

Edit: NWM i never owned a scx10 but after checking spacing is 56mm on them to. So the body I have is for scx10. My issue was how this chassis I have mounted the hops. I have now made a temp fix until the one making this test chassis can figure out a better way to get it right.


Skickat från min iPhone med Tapatalk