Post yer sand dragsters!

[ColquittCustom405]

Originally Posted by hotwheels000

Here the picture that be getting when I'm getting the get the rail making of it then I remade the chassis line bender metal rod fixture.

Nope dude that's wasn't mine. You did a good job making it better.

[hotwheels000]

Originally Posted by ColquittCustom405

Nopethat'sgoodminedidajob

Youmakingitwasn'tdudebetter.

[derwood21]

Still a work in progress. Built it w/ rustler suspension originanlly but its not wide enough. I have front and rear jato susp. going on it. Don't have the cash to put in it right now so it will be sharing a motor/esc with my Rustler VXL for alittle bit.

[camel_rc]

Not the best shots, but they're from a video.

[TMXONR]

Here is a pic of mine from back when I built it.



here's the video

http://www.youtube.com/watch?v=E9EODJO3pLA

[z50_Jumper]

That thing would be complete with some huge coilovers going up the back of the frame. maybe a couple more bars in the frame too. but I like it.

[mikedealer]

here is a pic of mine

[z50_Jumper]

I so badly want to see a frame built like this: I have seen the red truggy someone built on here that looks similar, but this is just soo clean.

[rusty_rail]

here's mine, nitro rusty based sandrail.
i still need the roof and some seats on it

here's some pics of when i started, wich by the way i have a thread about but nobody seemed to be interested then maybe know somebody likes it, any opinions???

[z50_Jumper]

I like it, would look really cool with an MIP 360 pipe on it! Too bad the cage doesnt extend out further in the rear a little more but other than that looks like fun!

[superelmer]

[dhoffroad]

well not a sand only rig but I put some paddles on my VXL pede and kicked up some roosts and wheelies....

[ColquittCustom405]

Rusty Rail
Yours don't look half bad dude. I'm diggin that color.

[dhoffroad]

here is some short vid clips to go with the pics I posted above. all this was before I took a tumble into the water....LOL

http://www.youtube.com/watch?v=IQPrIdIak8U

[wffunk]

http://i43.photobucket.com/albums/e3...r/IMG_0099.jpg

do that is sick do you have any more pics or videos

[NEK5]

Originally Posted by camel_rc

Here's mine.



RC10 goldtub:
HPI Baja Bug
B4 stealth trans
RPM arms
MIP BB steering
Panther single rib on RPM revolvers (front)
Proline paddles on RPM revolvers (rear)
Orion 10x2 V2, LRP speedo



http://video.google.com/videoplay?do...19488010713867

What do you have?

What do you get for run time with that setup?

[chevy42083]

Not a sand rail, but it's got paddle tires
Plenty of mud and dirt from earlier. You can see the RC10 buggy body I use as an inner body. Speed Gem 16t, Early 1990s RC10T. Soon to be brushless.




No wheelies... not enough power, an old heavy RC10T, and fairly hard packed ground.

Right click/save as.. please. Nothing too exciting, ground was a little too hard for the paddles up on the hills. Also, filming myself. I'll get some better vids later of the whole area...especially when the flats dry out a little. Let me know if the link doesn't work.
http://s-seriesforum.com/albums/album73/DSCN0315.mov

[NEK5]

Originally Posted by chevy42083

Not a sand rail, but it's got paddle tires
Plenty of mud and dirt from earlier. You can see the RC10 buggy body I use as an inner body. Speed Gem 16t, Early 1990s RC10T. Soon to be brushless.




No wheelies... not enough power, an old heavy RC10T, and fairly hard packed ground.

Right click/save as.. please. Nothing too exciting, ground was a little too hard for the paddles up on the hills. Also, filming myself. I'll get some better vids later of the whole area...especially when the flats dry out a little. Let me know if the link doesn't work.
http://s-seriesforum.com/albums/album73/DSCN0315.mov

I should have one of these set up by mid week next week full carbon chassis, yada yada...this one just may pull some wheelies

[wayfastwhitey440]

Heres my little bros pede that i sand dragstered out. I lengthened the chassis with a piece of carbon fiber and added maxx/losi shocks and use panther tires with front pede rims for front and back to give it that offset every thing else is stock

[wayfastwhitey440]

thanks alot its supose to be warmer this week on long island so maby i will get some sand shots