RCCrawler Forums

vito · 02-09-2011, 08:36 PM

got a rc 8 t with and e kit in it. is the mamba monster a good set up for it im look inr at the 2200 kv

MadForce · 02-10-2011, 01:22 AM

After a couple of burnt motors I gave this one a try:
http://www.offshoreelectrics.com/pro...-580-L&cat=116
Coupled it with an air ESC 125A with brake and a pistix module and 8S lipo.
All that on a Kyosho ST-RR converted. This was the only setup that would keep up with a race nitro truggy on the track.
Everything else I tried was loosing power after 5 or 6 laps. Sadly this setup is heavy.
My advice is 40+ series motors are the way for truggies if you want to chase seconds.

02-09-2011, 08:36 PM	#1
vito Rock Crawler Join Date: Jul 2009 Location: roseburg Posts: 636	what kv for a e truggy got a rc 8 t with and e kit in it. is the mamba monster a good set up for it im look inr at the 2200 kv

02-10-2011, 01:22 AM	#2
MadForce RCC Addict Join Date: Nov 2008 Location: Greece, sun, sea and rocks Posts: 1,242	After a couple of burnt motors I gave this one a try: http://www.offshoreelectrics.com/pro...-580-L&cat=116 Coupled it with an air ESC 125A with brake and a pistix module and 8S lipo. All that on a Kyosho ST-RR converted. This was the only setup that would keep up with a race nitro truggy on the track. Everything else I tried was loosing power after 5 or 6 laps. Sadly this setup is heavy. My advice is 40+ series motors are the way for truggies if you want to chase seconds.

Sponsored Links

RCCrawler Forums

Thread: what kv for a e truggy