Tamiya MF-01X

[mike190282]

Thought I'd share my Jimny as well.

[BJoe]

Love the Days of Thunder theme!

[bvrc]

Sent from my SAMSUNG-SM-G890A using Tapatalk

[JatoTheRipper]

What are the "must-have" upgrades while building this rig? I have bearings, aluminum motor plate, and aluminum driveshaft on my list so far.

[BJoe]

I'm finally getting ready to paint the body for mine (even though it has been built for nearly a year)! I do have a question though, has anybody come out with high clearance bumpers for these rigs?

[OSRC]

I have one of these:

for Tamiya MF01X #STR358BL, ,(STR358BL) by Active Hobby Aluminum Front Tube Bumper Set Black

But i haven't mounted it yet. Not sure if it's quite "high clearance" though.

[BJoe]

I was kinda hoping for something 3d printed that has more "ramp" to it for a skid plate.

[BJoe]

Finally got mine painted.......only built it a year ago........

[BJoe]

Anybody found better driveshafts for these things yet? I keep spitting the rear bones out of mine.............last time it happened on these rocks

20170714_193912 by bjoehandley, on Flickr

I'm beginning to think that these might be necessary
https://www.tamiyausa.com/product/it...oduct-id=42300

[alexleblanc]

mine kept spitting out the dogbones as well, the CVD's seem to have fixed that problem.

[MARCELO CAMPOS]

Hi guys.

I am waiting for my Tamiya MF-01X.

I bought the kit with blue body pre-painted, esc and combo but with the Yeahracing suspension kit.

I also buyed tamiya mini cva shocks, ballbearing kit. But tires and wheels i am searching the best choice.

I almost buy 1.55 wheels with 94mm tires. What do you recomend?

Marcelo

[BJoe]

Any of the 1.55 wheels should work, might look at the smaller tires though. The ones I have on mine rub a lot. In the little I've used it.

[NFA Fabrication]

Recently finished my Beetle kit. Threw an ebay Brushless kit in it (was purchased for my Monster Beetle, but it has no business having that much power I decided). Now will need bearings and shocks. I just need basic plastic CVA shocks, not the expensive aluminum kit. I ordered 2 Tamiya 50746 CVA kits. I hope that these are the right ones. The box is pushing the Tamiya "54000 M-Chassis" aluminum shock kit, but that is too spendy for this build. What Tamiya CVA plastic shocks are you guys running?

https://www.tamiyausa.com/product/it...oduct-id=50746

[OSRC]

Very nice! I use Tamiya super mini plastic CVA's on all my mini's - they work great and are reasonably priced.

[NFA Fabrication]

Originally Posted by OSRC

Very nice! I use Tamiya super mini plastic CVA's on all my mini's - they work great and are reasonably priced.

Thanks! This is what I ordered, Sames kits?

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[OSRC]

Yessir, that's it. Only 2 shocks per package, make sure you order 2. Stock springs from the kit will slip right on if what comes with them is too stiff or too soft. .

[NFA Fabrication]

Originally Posted by OSRC

Yessir, that's it. Only 2 shocks per package, make sure you order 2. Stock springs from the kit will slip right on if what comes with them is too stiff or too soft. .

Thanks man! I did order 2 sets. I just wish I could find 1.9 Beetle wheels. I think the M Chassis ones are 1.55.