RCCrawler Forums

thunder7845 · 12-23-2008, 08:57 PM

Well I had a ton of fun pulling at WWNH at the last comp, so I thought I would see if anyone else would be interested? Heres what I was thinking for now

TrailTruck Class there would only be 2 restrictions, sled can be hooked no higher than 3inches on the truck and can't have any additonal weight added to the front of the truck. Other than that anything goes.

High Lift Class.
1.Battery 6 cell sub c may not be located any farther forward on chassis than stock location.
2.Axles may be locked.
3.Rear suspension may be locked,Front suspension to be left factory with the exception of after market shocks.
4.Weight-9 LBS all non scale appearing weights must be out of site from normal viewing,Weight boxes permitted.
Weights may not exceed 5 inches from center of front axle forward.
5.Wheelbase and chassis length will remain stock for the H.L chassis.
6.Hitch is to be 2inch max.

The are kinda based of the rcmt high lift pulling class.

venom-crawler · 12-23-2008, 10:42 PM

im in for sure already started to mod the highlift using the stock front bumper for the weight box mount. started measuring for the hitch too.
sam and i were talking if it goes over well enough we can go off of the rules a little closer but for now just base our rules off of theres.

thunder7845 · 12-24-2008, 01:37 PM

So no one else is interested or has opinion on this?

venom-crawler · 12-24-2008, 07:10 PM

did i mention i was in? i know chad and rick are down.

thunder7845 · 12-24-2008, 07:19 PM

Quote:

Originally Posted by venom-crawler

did i mention i was in? i know chad and rick are down.

Ok I got ya, so do the rules seem pretty fair?

venom-crawler · 12-30-2008, 10:44 PM

Well it looks like its just me and you sam that will be pullin the sled.

thunder7845 · 12-31-2008, 05:48 AM

Eh it's all good, I'm gonna order my highlift next week and the rest for the parts to finish my pro-mod 2wd pullers as well.

Jam1sstang · 01-09-2009, 02:50 PM

Well That does sound like A lot of fun.

thunder7845 · 01-09-2009, 10:20 PM

I will be building 3 or 4 pro mod 2wds right off the start, that way I can let people try it and get a little more interest in this type of event. I like crawling but it's nice to throw some other types of events in the mix also.

12-23-2008, 08:57 PM	#1
thunder7845 Quarry Creeper Join Date: Jul 2008 Location: Minot Posts: 324	Truck Pulling!!!! Well I had a ton of fun pulling at WWNH at the last comp, so I thought I would see if anyone else would be interested? Heres what I was thinking for now TrailTruck Class there would only be 2 restrictions, sled can be hooked no higher than 3inches on the truck and can't have any additonal weight added to the front of the truck. Other than that anything goes. High Lift Class. 1.Battery 6 cell sub c may not be located any farther forward on chassis than stock location. 2.Axles may be locked. 3.Rear suspension may be locked,Front suspension to be left factory with the exception of after market shocks. 4.Weight-9 LBS all non scale appearing weights must be out of site from normal viewing,Weight boxes permitted. Weights may not exceed 5 inches from center of front axle forward. 5.Wheelbase and chassis length will remain stock for the H.L chassis. 6.Hitch is to be 2inch max. The are kinda based of the rcmt high lift pulling class. Last edited by thunder7845; 12-23-2008 at 08:59 PM.

12-23-2008, 10:42 PM	#2
venom-crawler Pebble Pounder Join Date: Jan 2005 Location: Minot Posts: 162	im in for sure already started to mod the highlift using the stock front bumper for the weight box mount. started measuring for the hitch too. sam and i were talking if it goes over well enough we can go off of the rules a little closer but for now just base our rules off of theres.

12-24-2008, 01:37 PM	#3
thunder7845 Quarry Creeper Join Date: Jul 2008 Location: Minot Posts: 324	So no one else is interested or has opinion on this?

12-24-2008, 07:10 PM	#4
venom-crawler Pebble Pounder Join Date: Jan 2005 Location: Minot Posts: 162	did i mention i was in? i know chad and rick are down.

12-30-2008, 10:44 PM	#6
venom-crawler Pebble Pounder Join Date: Jan 2005 Location: Minot Posts: 162	Well it looks like its just me and you sam that will be pullin the sled.

12-31-2008, 05:48 AM	#7
thunder7845 Quarry Creeper Join Date: Jul 2008 Location: Minot Posts: 324	Eh it's all good, I'm gonna order my highlift next week and the rest for the parts to finish my pro-mod 2wd pullers as well.

01-09-2009, 02:50 PM	#8
Jam1sstang Quarry Creeper Join Date: Aug 2004 Location: Grand Forks, ND Posts: 399	Well That does sound like A lot of fun.

01-09-2009, 10:20 PM	#9
thunder7845 Quarry Creeper Join Date: Jul 2008 Location: Minot Posts: 324	I will be building 3 or 4 pro mod 2wds right off the start, that way I can let people try it and get a little more interest in this type of event. I like crawling but it's nice to throw some other types of events in the mix also.

Sponsored Links

RCCrawler Forums

Thread: Truck Pulling!!!!