| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
07-25-2007, 10:35 PM
| #1 |
| Newbie Join Date: Aug 2006 Location: everson
Posts: 39
|  stage 2 on a more comp worthy set of pti axels
well finally had a day off so i started to work on making a stronger ring gear i finally decided to cut my tlt spool apart so i just had the ring gear left from there i realized that it wont fit in the pti axel houseing it is to large but i did find a way to make it fit (i dont own a lathe which would have been nice there) so i just chucked it up and the drill press and held a file to it untill i got it the same size or just a lil smaller the the plastic pti gear then i had to drill the holes in the tlt ring gear i used a 3/32" drill bit for this i lined up the holes from the pti gear and started to drill i will post pics up tomarrow just wanted to start the thread tonight i dont have pics of the whole process just the start and the finished product so if anyone wants to kno more about this pm me and i will send a better detailed explaintion of how this is all done
|
|  |
| Sponsored Links | |
| | |
|
07-26-2007, 12:07 AM
| #2 |
| Rock Crawler Join Date: Apr 2005 Location: Upland
Posts: 546
|
I was thinking of doing the same thing. I'd really like to see your results. I started looking for alternative ring gears as well. I think I might have a few leads. Also you might want to check out this website. https://sdp-si.com/eStore/Direct.asp?GroupID=271 I'm going to see if I can find a gear set that will match the PTI ones. I'll be sure to let everyone know if I find anything. |
|
| |
|
07-26-2007, 01:34 AM
| #3 |
| Quarry Creeper  Join Date: Jul 2006 Location: In a tree top with my chainsaw!!
Posts: 476
|
I am going to bed now and when I wake up there better be pics and test results.  If this is going to work, I need to know if I should buy stock pti parts or some, ughh, tlt parts. Glad some one is trying to find a better R&P for the goliath. |
|
| |
|
07-26-2007, 08:45 AM
| #4 |
| Newbie Join Date: Aug 2006 Location: everson
Posts: 39
|
welli said i would post up the pics i have here they are    they arint great pics but i hope they get the point over on what they look like |
|
| |
|
07-26-2007, 10:09 AM
| #5 |
| Rock Crawler Join Date: Apr 2005 Location: Upland
Posts: 546
|
How much material did you remove from the outer circumference of the gear? And how does it mate up with the pinion?
|
|
| |
|
07-26-2007, 02:18 PM
| #6 |
| I wanna be Dave Join Date: May 2005 Location: Anchorage, Alaska
Posts: 2,048
|
Wow. If anything, I give you an "A+" for the effort!
|
|
| |
|
07-26-2007, 08:11 PM
| #7 |
| Newbie Join Date: Aug 2006 Location: everson
Posts: 39
|
as i said i removed from the tlt ring gear to make it the same size as the pti gear i dont kno the exact amount but if you have a pti gear then you will kno when it fits and for the 2nd question it fits a lil tight bc the tlt ring gear is thicker then the pti's but its not to tight that it will mess up the gear from that i am told and thanks k_b i try and i hope tihs will help many other ppl with the pti prob i have |
|
| |
|
07-26-2007, 08:33 PM
| #8 |
| I wanna be Dave Join Date: May 2007 Location: Fairfield ME
Posts: 3,886
|
This is exactly what I was getting at in your other thread.
|
|
| |
|
07-27-2007, 11:39 PM
| #9 |
| Quarry Creeper Join Date: Jul 2006 Location: In a tree top with my chainsaw!!
Posts: 476
|
this is looking like a very worth while mod. Good work so far |
|
| |
|
| |
Linear Mode
