RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   RC4WD Bully (http://www.rccrawler.com/forum/rc4wd-bully/)
-   -   Bully axles with losi chassis (http://www.rccrawler.com/forum/rc4wd-bully/243962-bully-axles-losi-chassis.html)

losikid 04-13-2010 07:26 PM

Bully axles with losi chassis
 
I was looking at the bully axles to replace my losi moa's and i was wondering if i could mount bullies to a lcc chassis,

ROCKEDUP RICKY 04-13-2010 07:38 PM

Whats the width of a losi chassis.

slowride1 04-13-2010 07:46 PM

i was looking at doing something like that but noticed that the top link holes on a shafty chasis isnt rite . they will always run down hill nt flat so i think you will have bite prob.

Reflection 04-13-2010 07:54 PM

With the gearbox and motor,it'd be very close...if it'd even work mounting the lowers. The Losi skid puts the lowers as triangulated as a set of lowers can get.:ror: Might work though

The vertical separation of the upper and lower link mounting points on a Bully,or any other MOA style axle,is a BIG difference when compared to a Losi axle. That coupled up to a Losi chassis....I think your link configuration and squat numbers are going to be all to poop.

Will it bolt up?...Maybe.

I honestly think you'd be better off getting a different chassis designed for a standard MOA axle.

A chassis I've just started running,it's done nothing but amaze me every time I've run it.

http://img.photobucket.com/albums/v7...s/100_0102.jpg

Cracker Jack

EXW 04-14-2010 05:50 AM

I'm not sure it will bolt up unless you put some serious bends in your links. As has been mentioned, the Lois lowers are very close at the skid, which will make clearing the Bully gear case a challenge. Also, the Losi upper link mounts on the axles are a lot lower than the Bullys.

Of course, if you have the parts already, you can try and see what happens. I'd be interested to see a picture if you do.

Kunfuzed 04-15-2010 10:22 PM

derwood just did this... hey derwood post some pics lets see that thing..

Boids 04-19-2010 04:59 PM

I didn't know losi had a moa axle , can someone post a link i can't seem to find anything on it.

Boids 04-19-2010 05:05 PM

if there talking about the conversion to moa i found a bunch on that so if thats it i'm all good on my search.

losikid 04-19-2010 06:52 PM

http://eritexinc.com/zencart/index.p...gcjgvdacdm8j42

derwood21 05-05-2010 03:33 PM

Sorry the pics suck. Heres my Bullies on a Losi chassis. I've been running it for awhile now. I performs good and I've been very happy with it.
http://i301.photobucket.com/albums/n...g?t=1273094971http://i301.photobucket.com/albums/n...g?t=1273094897
http://i301.photobucket.com/albums/n...g?t=1273095073http://i301.photobucket.com/albums/n...g?t=1273095095
http://i301.photobucket.com/albums/n...g?t=1273094737http://i301.photobucket.com/albums/n...g?t=1273095033


All times are GMT -6. The time now is 11:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com