RCCrawler Forums

Colgout · 01-25-2014, 05:52 PM

Quote:

Originally Posted by cboggs

The chassis is made by 5th Dimension and is called the MarkII, pm TheSCorpionKing for one as it hasn't been put up for sale yet.

From the picture, it looks like G10 material. Is that right?

cboggs · 01-25-2014, 06:02 PM

That is correct, its G10 to keep the price point lower than CF.

Hittman · 01-26-2014, 01:09 AM

Rig is looking good. The video is good stuff as well.

How do you like the non-8* steering? It seems like it handled good in the video. But have you gotten much testing in?

I am getting tired of this 8* crap.. I think the switch over might happen sooner than later.

cboggs · 01-26-2014, 01:22 AM

Quote:

Originally Posted by Hittman

Rig is looking good. The video is good stuff as well.

How do you like the non-8* steering? It seems like it handled good in the video. But have you gotten much testing in?

I am getting tired of this 8* crap.. I think the switch over might happen sooner than later.

I haven't got to run it to much but I do like it better than the 8* that was on the XR. It digs better and doesn't seem to lift a tire as often as the 8* did, it stays more planted.

Hittman · 01-26-2014, 01:27 AM

Quote:

Originally Posted by cboggs

I haven't got to run it to much but I do like it better than the 8* that was on the XR. It digs better and doesn't seem to lift a tire as often as the 8* did, it stays more planted.

That's my biggest problem right now. The lifting is killer. I have gotten to where I can control it most of the time.. It's just annoying. It would be nice to have a rig that I didn't have to worry about that as being a problem.

Keep it up thou. You have a nice thread going here.

cboggs · 01-30-2014, 01:44 PM

Got my new RC4WD knuckle weights.

Erin · 01-30-2014, 01:46 PM

So do they just clear the hub, or is it going to need a bit of massaging? I cant tell from that one pic

chevotafun · 01-30-2014, 01:51 PM

Quote:

Originally Posted by Erin

So do they just clear the hub, or is it going to need a bit of massaging? I cant tell from that one pic

It looks like they clear just fine from the picture but i'm sure Chris will jump in and tell

cboggs · 01-30-2014, 01:56 PM

They will clear, but the mounting screws on that side of the weight aren't counter sunk so they get in the way. There is also no way to add more weight set up like that so it will be the normal mounting for me.

ROWDY RACING · 01-30-2014, 02:02 PM

Quote:

Originally Posted by cboggs

They will clear, but the mounting screws on that side of the weight aren't counter sunk so they get in the way. There is also no way to add more weight set up like that so it will be the normal mounting for me.

Thanks for clearing that up Chris.

Normal setup with extra weight will be the ticket with or without the top half...

cboggs · 02-22-2014, 12:53 PM

So I've been sick the last 2 weeks now and we had our club comp last Saturday, I decided to go since it was at a awesome spot and the points race is really tight this year. I shouldn't have gone as I've been paying for it this week. I still managed to get 4th, here's a few pics.

TSK · 03-11-2014, 01:29 AM

Quote:

Originally Posted by cboggs

I had to take one for the team.

What "team" are you on????l

And I must apologize. I keep forgetting to check in this section.

Rig looks like it's running solid. Hope you are finally feeling better.

cboggs · 03-19-2014, 10:22 AM

Here's a pic from our club comp on Saturday. This was right before one of my BR-Mini esc's decided not to work anymore ending my day for placing well.

josh6575 · 03-19-2014, 01:23 PM

That is one nice rig. I love those wheels, or lack of. On the knuckle weights. I had to take a dremel and remove a very small amount of material from the slw hub to get them to clear. When I put them on it just barely dragged witness marks onto the flutes. Touched them with a sanding drum and nice and smooth. Hopefully I'll get to crawl with you this summer.

Crawllife · 03-29-2014, 11:06 PM

Man the truck looks mean in that last pic.

cboggs · 03-30-2014, 10:51 AM

Quote:

Originally Posted by Crawllife

Man the truck looks mean in that last pic.

Did you get your body painted yet for yours? I cant wait to see how yours turns out.

Crawllife · 03-30-2014, 05:45 PM

Quote:

Originally Posted by cboggs

Did you get your body painted yet for yours? I cant wait to see how yours turns out.

Not yet. I'm a pretty simple guy but folks expect it to be wild. We will see.
One week until my season starts. I'm pretty amped about it!

Rckcrwlr · 03-30-2014, 05:59 PM

Quote:

Originally Posted by cboggs

[/URL]

Nice Hat...

CrawlrKing · 03-30-2014, 08:23 PM

RC4WD, where's my cap ?

From iPad with Tapatalk

Rckcrwlr · 03-31-2014, 02:46 AM

Quote:

Originally Posted by CrawlrKing

RC4WD, where's my cap ?

https://store.rc4wd.com/RC4WD-Fitted...at_p_3339.html

01-25-2014, 06:02 PM	#62
cboggs 5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa. Posts: 1,916	re: cboggs' DOMINATOR Bully 2 That is correct, its G10 to keep the price point lower than CF.

01-26-2014, 01:09 AM	#63
Hittman I wanna be Dave Join Date: Aug 2011 Location: Burque Posts: 3,805	re: cboggs' DOMINATOR Bully 2 Rig is looking good. The video is good stuff as well. How do you like the non-8* steering? It seems like it handled good in the video. But have you gotten much testing in? I am getting tired of this 8* crap.. I think the switch over might happen sooner than later.

01-30-2014, 01:44 PM	#66
cboggs 5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa. Posts: 1,916	re: cboggs' DOMINATOR Bully 2 Got my new RC4WD knuckle weights.

01-30-2014, 01:46 PM	#67
Erin I wanna be Dave Join Date: Dec 2006 Location: Goin broke losing weight..... Posts: 2,262	re: cboggs' DOMINATOR Bully 2 So do they just clear the hub, or is it going to need a bit of massaging? I cant tell from that one pic

01-30-2014, 01:56 PM	#69
cboggs 5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa. Posts: 1,916	re: cboggs' DOMINATOR Bully 2 They will clear, but the mounting screws on that side of the weight aren't counter sunk so they get in the way. There is also no way to add more weight set up like that so it will be the normal mounting for me. Last edited by cboggs; 01-30-2014 at 02:03 PM.

02-22-2014, 12:53 PM	#71
cboggs 5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa. Posts: 1,916	re: cboggs' DOMINATOR Bully 2 So I've been sick the last 2 weeks now and we had our club comp last Saturday, I decided to go since it was at a awesome spot and the points race is really tight this year. I shouldn't have gone as I've been paying for it this week. I still managed to get 4th, here's a few pics.

03-19-2014, 10:22 AM	#73
cboggs 5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa. Posts: 1,916	re: cboggs' DOMINATOR Bully 2 Here's a pic from our club comp on Saturday. This was right before one of my BR-Mini esc's decided not to work anymore ending my day for placing well.

03-19-2014, 01:23 PM	#74
josh6575 RCC Addict Join Date: Mar 2011 Location: Way out there! Posts: 1,465	re: cboggs' DOMINATOR Bully 2 That is one nice rig. I love those wheels, or lack of. On the knuckle weights. I had to take a dremel and remove a very small amount of material from the slw hub to get them to clear. When I put them on it just barely dragged witness marks onto the flutes. Touched them with a sanding drum and nice and smooth. Hopefully I'll get to crawl with you this summer.

03-29-2014, 11:06 PM	#75
Crawllife Fifth dimension Join Date: Oct 2012 Location: Quakertown Posts: 2,066	re: cboggs' DOMINATOR Bully 2 Man the truck looks mean in that last pic.

03-30-2014, 08:23 PM	#79
CrawlrKing Rock Crawler Join Date: Aug 2010 Location: Martinique Posts: 660	RC4WD, where's my cap ? From iPad with Tapatalk

cboggs' DOMINATOR Bully 2 - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The dominator	crawlmaster18	1.9 Scale Rigs	8	04-06-2010 06:35 PM
The dominator	crawlmaster18	Axial SCX-10	0	03-30-2010 12:46 AM
New Dominator 2.2	syco133	Tamiya Clod Buster	5	11-08-2005 03:00 PM

Sponsored Links

RCCrawler Forums

Thread: cboggs' DOMINATOR Bully 2