A&M Garage shackle flip kit

[1BadJeepBruiser]

If you have been wanting to properly match the 1:1 suspension on your TF2 to a real Hilux with the perch up front and shackles in rear then check out the A&M Garage on facebook

[stonecold]

After installing the kit it messed up the drive-line angle, I had to get some RC4WD Trail Stomper angled leaf mounts to clock the axle forward and give it a better angle.

[JatoTheRipper]

How much are the kits? FB is blocked here.

[1BadJeepBruiser]

Originally Posted by stonecold

After installing the kit it messed up the drive-line angle, I had to get some RC4WD Trail Stomper angled leaf mounts to clock the axle back and give it a better angle.

Weird, I didn’t have any issues with mine

Originally Posted by JatoTheRipper

How much are the kits? FB is blocked here.

25$

-Mike

[ProjektONE]

Ordered! Thanks for the video!

[Natedog]

Ordered from his website directly, but googly makes it hard to find, wants everyone to go to bookface instead.

Here's Bert's own website!
https://aandmgarage.com/

[snapon boy]

I've got all of the a&m garage parts and I love all of them

149 r/c worx/scalerfab/team brood.

[ferebeed]

I got the reverse shackle kit. Love it.
I ordered another set for another TF2 I got in a swap.


Sent from my iPhone using Tapatalk

[sgtlt]

Installed both the shackle reverse kit and the high clearance skid plate/ transfer case mount on my Marlin when I had it. Made a huge difference in how well the truck crawled.

[MAGNUMB]

Would this shackle kit work on a Bruiser?

[TheLetterJ]

Originally Posted by MAGNUMB

Would this shackle kit work on a Bruiser?

Maybe a silly question, but why would you want to use it on a Bruiser? Plenty of people have used the stock Bruiser parts to perform a shackle reversal on TF2's, and I've even used the Bruiser parts to do the same on a Sawback. Just seems like there would be no benefit to using this kit on a Bruiser, though the Bruiser parts can be a bit hard to track down sometimes.