Re: Redcat rs10 on r1 chassis yes the r1 is originally a shaft driven crawler, the drive shafts might be too short or too long depending on what links you use. |
Re: Redcat rs10 on r1 chassis I forgot - you might need to drill some holes in the skidplate for the different tranny or you might be able to use the Everest skidplate let us know what you come up with good luck |
Re: Redcat rs10 on r1 chassis Hello guys. I am starting up with this build again and I want a nice, and small lipo that will fit on this skid plate. Any good suggestions out there? http://images.tapatalk-cdn.com/15/12...65b004f7c4.jpg Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis Here are some more pics of the truck!http://images.tapatalk-cdn.com/15/12...f1a5524b07.jpghttp://images.tapatalk-cdn.com/15/12...0ee77a4293.jpghttp://images.tapatalk-cdn.com/15/12...36b863f8a7.jpg Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis Cabron some reason I can't send u a message lol. Idk what's up :) Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis you have filled up your message space in the forum. clear out the old messages in both the in and out folder and/or buy a star and that will give you more space for messages pictures etc. |
Re: Redcat rs10 on r1 chassis I just ordered some new parts for the rs10 build!! These are what I ordered http://images.tapatalk-cdn.com/15/12...484cbd8c8c.jpghttp://images.tapatalk-cdn.com/15/12...c793fab673.jpghttp://images.tapatalk-cdn.com/15/12...c2ed50cf50.jpghttp://images.tapatalk-cdn.com/15/12...535725f0ac.jpg now I just have to wait for them to come in! If u have any other things I should buy, tips, or tricks please let me know!! Also feedback on my build is awesome :) Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis thanks, that lipo checker seems nice I just bought me a pack of three of the checkers, for 7.50 it is not too much to loose if they are not any good we shall see those look like 2 stage shocks, seems to have 2 springs each when you get them take some detailed pics |
Re: Redcat rs10 on r1 chassis I will do. Also on the lipo checkers, it showes how much voltage each cell has. Also u can change how low of voltage u want to set the alarm to go off. So they seem pretty cool also very cheap! Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis I am looking into getting a front bumper for my rs10. I like the look of the scx10 honcho bumper but I wouldent know how to mount it one my r1 chassis. If anyone knows of a bumper that would be some what easy to mount on my chassis plz let me know!! Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis I frogot to mention this earlier but I did buy high tec servo's front and back http://images.tapatalk-cdn.com/15/12...620f9fa79d.jpg Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis I bought that same skid plate for my rs10 r1. I would recommend mounting the links inside of the skid. You should also bend your lower links for more clearance. I found it helped big time. I will post you some pictures.. |
Re: Redcat rs10 on r1 chassis Yes I will mount them inboard once I get the skid plate and ya post some pics Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis |
Re: Redcat rs10 on r1 chassis How did u bend the stock links? Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis I clamped them in my vise and bent them with a hammer or by hand depending how much meat I had to hold on to. Be careful not to bend too far then bend back because they will break |
Re: Redcat rs10 on r1 chassis Oh ok haha thx, I'm thinking of bending my rear links. Sent from my iPhone using Tapatalk |
Re: Redcat rs10 on r1 chassis Quote:
Here is a good and short video guide on bending aluminium at home, it will make it easier if you dont got a vice too. But be careful when heating since aluminium quality may vary. But i think you will be ok just bending them cold in a vice as long as you are gentle and dont overbend like skot124 said. Really nice trucks too, almost makes me wish I bought a rs10 ;-) |
Re: Redcat rs10 on r1 chassis The stock rs10 links are pretty easy to bend on a vice since they arnt round. You can get both links exactly the same if you have more then one bend |
Re: Redcat rs10 on r1 chassis Thanks for the advice guys. If I decide to bend my links that will help out! Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 02:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com