RCCrawler Forums

kona_joe · 06-01-2007, 12:34 PM

Great work on the emblems Stefan!

Chevy emblems would be nice for us guys with the Clodbuster body and the generic grille.

rockwell · 06-14-2007, 05:11 PM

Quote:

Originally Posted by kona_joe

Great work on the emblems Stefan!

Chevy emblems would be nice for us guys with the Clodbuster body and the generic grille.

I agree, it would be perfect for us clod guys

Maybe something like this?

obijuan · 06-14-2007, 06:30 PM

im seriously looking really hard for Silverado 30 picture, stefan has alot of other ones i had sent him but i cant for the life of me find one in town to take a photo of, if any of you actually have a pic of the emblem in HIGH res, it would be greatly appreciated. for all the clod guys, im so sorry this is taking so long, hes waiting on that one photo. :-( and im not gonna be drivin a custom deluxe if i can help it

scaleoffroad · 06-14-2007, 09:39 PM

Hi,
If it is so difficult to get a good picture of the silverado emblem, I will try now to make the chevy emblems with the pics I have. I have a good pic of the Blazer K5 emblem and I can work with it to get the correct type design.
I will make a set for the silverado 30 (fender emblems, front chevy logo, tailgate chevrolet emblem) and a set for the Blazer K5 (fender emblems, front chevy logo, tailgate chevrolet emblem).
Is this OK for you chevy owners?

Stefan

chip cross · 06-14-2007, 10:04 PM

what about some powerstroke emblems

chip cross · 06-14-2007, 10:10 PM

something like this for my highlift

PaloAltoK5 · 06-15-2007, 01:01 AM

Quote:

Originally Posted by scaleoffroad

Hi,
If it is so difficult to get a good picture of the silverado emblem, I will try now to make the chevy emblems with the pics I have. I have a good pic of the Blazer K5 emblem and I can work with it to get the correct type design.
I will make a set for the silverado 30 (fender emblems, front chevy logo, tailgate chevrolet emblem) and a set for the Blazer K5 (fender emblems, front chevy logo, tailgate chevrolet emblem).
Is this OK for you chevy owners?

Stefan

You da MAN!!

outcastrc · 06-15-2007, 05:22 AM

Received my emblems, thanks Stefan!

kona_joe · 06-15-2007, 08:34 AM

Quote:

Originally Posted by obijuan

im seriously looking really hard for Silverado 30 picture, stefan has alot of other ones i had sent him but i cant for the life of me find one in town to take a photo of, if any of you actually have a pic of the emblem in HIGH res, it would be greatly appreciated. for all the clod guys, im so sorry this is taking so long, hes waiting on that one photo. :-( and im not gonna be drivin a custom deluxe if i can help it

I have a 79 K10 so the emblem is different but I did find a few pics that may help

Fender

Rear Body SideEmblem

Tailgate

Hope this helps,
Joe

obijuan · 06-15-2007, 10:48 AM

that first one i good, whered you find it? heres one a buddy just gave me:

kona_joe · 06-15-2007, 11:11 AM

I found them on a website selling GM parts... classicindustries.com

In your pic the top emblem is from a 73 - 80 & the lower from 81 - 91 but I'm sure you know that.

obijuan · 06-15-2007, 11:15 AM

man i didnt even think about that place, thanks for the help on getting the pics Joe! a big thanks also to you stefan! this will be a killer add on to my crew cab! the measurements are almost the same as the K5 just about an inch longer IIRC.

kona_joe · 06-15-2007, 11:46 AM

Not a problem.... if there's anything else I can help with lmk.

I really looking forward to picking up a set for my Crew Cab Truggy

obijuan · 06-15-2007, 11:54 AM

ooooooooohhhhhh delicious! stefan you have my preorder for two sets, one truck and one blazer

scaleoffroad · 06-19-2007, 03:08 AM

Hi,
chrevrolet emblems are ready.
I've made a blazer K5 set and a silverado 30 set. Same as the other emlem sets – each set inkludes the double number of emblems you need for 1 body. The 3D looking "sun" logo of the fender emblem is not possible to etch, so I had to make it without 3D look.

Measurements: fender emblems (K5/silverado) width 25 mm / height 13 mm, Chevy Logo width 20 mm / height 7 mm, Chevrolet tailgate width 43 mm / height 6 mm.
The chevrolet emblems are bigger than the others I've made till yet. For my price calculation I have to look how much emblems I get out of one etching sheet ... so these emblems are a bit more expensive.

Set includes raw emblems: (4) Blazer K5 or Silverado 30, (2) Chevrolet Logos, (2) Chevrolet tailgate emblems
Price: 14,50 EUR (19,50 USD)
Shipping to US (only emblems, max. 50 grams) in a registered letter is 5,-- EUR (6,80 USD)

If you want to order, please send me pm. (When I find some time, I will add the emblems to my website too)

Stefan

PaloAltoK5 · 06-19-2007, 03:35 AM

PM coming!!

Any luck with the Cheyenne logo??

kona_joe · 06-19-2007, 06:29 AM

Very Cool!

Thanks for investing your time and talent on these emblems.

PM sent

obijuan · 06-19-2007, 07:42 AM

droooooooooooooooooooooooooooooollllll those are gorgeous!!!!!!!!!!!!! i cant believe it!!!!!!!!!!!!!!!!!!!!!! AWW MAN! those are incredible!! wow, man!!
excellent.

how should i affix these to my truck? i seriosuly dont want to lose them.

scaleoffroad · 06-19-2007, 08:44 AM

Hi,
for fixing them I use 2 components epoxy resin glue. This works very well with hart plastic bodys and with my fibreglass XJ. But I'm not sure what is the best glue for fixing them on lexan bodys ... better you make a test glueing.
Every set includes the double numbers of emblems ... if you loose one you have some replacement.

Stefan

obijuan · 06-19-2007, 08:47 AM

allright! thanks a ton! these will be going on hardbodys and i hope the paint is stuck enough! Its really appreciated Stefan!

06-01-2007, 12:34 PM	#81
kona_joe Quarry Creeper Join Date: Mar 2004 Location: Massachusetts Posts: 234	Great work on the emblems Stefan! Chevy emblems would be nice for us guys with the Clodbuster body and the generic grille. Last edited by kona_joe; 06-01-2007 at 12:48 PM.

06-15-2007, 11:11 AM	#91
kona_joe Quarry Creeper Join Date: Mar 2004 Location: Massachusetts Posts: 234	I found them on a website selling GM parts... classicindustries.com In your pic the top emblem is from a 73 - 80 & the lower from 81 - 91 but I'm sure you know that. Last edited by kona_joe; 06-15-2007 at 11:50 AM.

06-19-2007, 03:08 AM	#95
scaleoffroad Quarry Creeper Join Date: Mar 2007 Location: Germany Posts: 251	Hi, chrevrolet emblems are ready. I've made a blazer K5 set and a silverado 30 set. Same as the other emlem sets – each set inkludes the double number of emblems you need for 1 body. The 3D looking "sun" logo of the fender emblem is not possible to etch, so I had to make it without 3D look. Measurements: fender emblems (K5/silverado) width 25 mm / height 13 mm, Chevy Logo width 20 mm / height 7 mm, Chevrolet tailgate width 43 mm / height 6 mm. The chevrolet emblems are bigger than the others I've made till yet. For my price calculation I have to look how much emblems I get out of one etching sheet ... so these emblems are a bit more expensive. Set includes raw emblems: (4) Blazer K5 or Silverado 30, (2) Chevrolet Logos, (2) Chevrolet tailgate emblems Price: 14,50 EUR (19,50 USD) Shipping to US (only emblems, max. 50 grams) in a registered letter is 5,-- EUR (6,80 USD) If you want to order, please send me pm. (When I find some time, I will add the emblems to my website too) Stefan Last edited by scaleoffroad; 06-19-2007 at 03:13 AM.

06-19-2007, 03:35 AM	#96
PaloAltoK5 RCC Addict Join Date: Nov 2005 Location: Saving for Nationals!! Posts: 1,696	PM coming!! Any luck with the Cheyenne logo?? Last edited by PaloAltoK5; 06-19-2007 at 03:42 AM.

06-19-2007, 06:29 AM	#97
kona_joe Quarry Creeper Join Date: Mar 2004 Location: Massachusetts Posts: 234	Very Cool! Thanks for investing your time and talent on these emblems. PM sent Last edited by kona_joe; 06-19-2007 at 06:34 AM.

06-14-2007, 06:30 PM	#83
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	im seriously looking really hard for Silverado 30 picture, stefan has alot of other ones i had sent him but i cant for the life of me find one in town to take a photo of, if any of you actually have a pic of the emblem in HIGH res, it would be greatly appreciated. for all the clod guys, im so sorry this is taking so long, hes waiting on that one photo. :-( and im not gonna be drivin a custom deluxe if i can help it

06-14-2007, 09:39 PM	#84
scaleoffroad Quarry Creeper Join Date: Mar 2007 Location: Germany Posts: 251	Hi, If it is so difficult to get a good picture of the silverado emblem, I will try now to make the chevy emblems with the pics I have. I have a good pic of the Blazer K5 emblem and I can work with it to get the correct type design. I will make a set for the silverado 30 (fender emblems, front chevy logo, tailgate chevrolet emblem) and a set for the Blazer K5 (fender emblems, front chevy logo, tailgate chevrolet emblem). Is this OK for you chevy owners? Stefan

06-14-2007, 10:04 PM	#85
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	what about some powerstroke emblems

06-14-2007, 10:10 PM	#86
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	something like this for my highlift

06-15-2007, 05:22 AM	#88
outcastrc Pebble Pounder Join Date: Mar 2005 Location: Kelowna, B.C., Canada Posts: 127	Received my emblems, thanks Stefan!

06-15-2007, 10:48 AM	#90
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	that first one i good, whered you find it? heres one a buddy just gave me:

06-15-2007, 11:15 AM	#92
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	man i didnt even think about that place, thanks for the help on getting the pics Joe! a big thanks also to you stefan! this will be a killer add on to my crew cab! the measurements are almost the same as the K5 just about an inch longer IIRC.

06-15-2007, 11:46 AM	#93
kona_joe Quarry Creeper Join Date: Mar 2004 Location: Massachusetts Posts: 234	Not a problem.... if there's anything else I can help with lmk. I really looking forward to picking up a set for my Crew Cab Truggy

06-15-2007, 11:54 AM	#94
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	ooooooooohhhhhh delicious! stefan you have my preorder for two sets, one truck and one blazer

06-19-2007, 07:42 AM	#98
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	droooooooooooooooooooooooooooooollllll those are gorgeous!!!!!!!!!!!!! i cant believe it!!!!!!!!!!!!!!!!!!!!!! AWW MAN! those are incredible!! wow, man!! excellent. how should i affix these to my truck? i seriosuly dont want to lose them. Last edited by obijuan; 06-19-2007 at 07:44 AM.

Sponsored Links

06-19-2007, 08:44 AM	#99
scaleoffroad Quarry Creeper Join Date: Mar 2007 Location: Germany Posts: 251	Hi, for fixing them I use 2 components epoxy resin glue. This works very well with hart plastic bodys and with my fibreglass XJ. But I'm not sure what is the best glue for fixing them on lexan bodys ... better you make a test glueing. Every set includes the double numbers of emblems ... if you loose one you have some replacement. Stefan

06-19-2007, 08:47 AM	#100
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	allright! thanks a ton! these will be going on hardbodys and i hope the paint is stuck enough! Its really appreciated Stefan!

RCCrawler Forums

Thread: scale brand/model emblems