1/10 NATO Jerry Cans + Mounts

[moedawi]

Originally Posted by rbgerrish

UPDATED 3/22/13 with Axial Rubicon Jeep Dual Holder!
----------------------------------------------------

Hello folks,

I've begun making DSPro NATO Jerry Cans! I didnt feel there was a true 1/10 can on the market, so I made these, which are 47mm tall- exactly 1/10 of a real can.

They are plastic and hand primed and painted, and can easily be weathered or repainted. They are mostly hollow to save weight- each can weighs about 6 grams.

I'm also offering 3 different mounting options at this time (more to come) and each one includes a small length of realistic strap to secure the can to the mount. (Use CA, glue the strap to itself once looped through the slits.) The holders all have a hole for a countersunk 3mm screw so you can mount them to a vehicle.

Initial pricing is as follows and includes shipping in the continental US. (Outside shipping available, PM me before ordering)

Can: $9 /each
Single holders: $3 /each
Dual Holder: $4 /each
Axial JK Dual Can holder for Poison Spider Swing-away: $10 /each.

If you would like to purchase one, please do so on my website: DSPro | Design and Production

The cans are strong, but the little handles can snap should the vehicle roll violently onto them. If this happens, you can use a short piece of styrene rod and some CA to build a new handle.

Thanks and watch for more fun scale products!

Ryan

got'em today they look great and fit mickey 1.9

[rbgerrish]

Originally Posted by moedawi

got'em today they look great and fit mickey 1.9

Awesome! That is good to know.

[ROLANDROCKSHOP]

order placed!!

cant wait!

[inebriatedmarmoset]

Originally Posted by inebriatedmarmoset

Your order on DSPro is complete.

You have chosen the PayPal method.

Your order will be sent very soon.


Thanks again, Ryan! nice design, also really diggin' this set up! super easy to install but adds a unique way to store some sweet scale items.

These look awesome, still waitin on mine...

[rbgerrish]

Originally Posted by inebriatedmarmoset

These look awesome, still waitin on mine...

Shipped on the 2nd, if you dont get it soon, let me know, I'll take care of you.

[inebriatedmarmoset]

Originally Posted by rbgerrish

Shipped on the 2nd, if you dont get it soon, let me know, I'll take care of you.

Ryan is awesome, guys. He's the man!

[inebriatedmarmoset]

Originally Posted by rbgerrish

Shipped on the 2nd, if you dont get it soon, let me know, I'll take care of you.

Hey Ryan, so my order came today but unfortunately, upon opening, I found some damage.



no worries though, should be able to CA glue this bad boy and it should hold up, I think. Will try and post a pic when it's mounted later when I can.

Thanks again!

[rbgerrish]

Originally Posted by inebriatedmarmoset

Hey Ryan, so my order came today but unfortunately, upon opening, I found some damage.

no worries though, should be able to CA glue this bad boy and it should hold up, I think. Will try and post a pic when it's mounted later when I can.

Thanks again!

I'm guessing USPS dropped it under their truck! Let me know if gluing diesnt work and I"ll send you another one. Thanks!

All orders have been shipped! I should have another batch of JK mounts done soon.

[inebriatedmarmoset]

Originally Posted by rbgerrish

I'm guessing USPS dropped it under their truck! Let me know if gluing diesnt work and I"ll send you another one. Thanks!

All orders have been shipped! I should have another batch of JK mounts done soon.

Looks like the glue's holding up! ...hung on the rocks a few times too, but didn't really see any structural damage...ill let you know if it breaks any time soon though....





I did notice though that the holding loops for the proline tools were too big and so they just slide right through (you can see in the pic below) with the tire back on they sit on the rear bumper so they're even but ran em unsecured and lost the shovel ha....were they meant to not be a tight/snug fit? these tools were kinda new

anyway, still stoked to have installed this mount, got some compliments too and made a recommendation to find ya on rcc, Ryan! Hope you get another buyer soon! he seemed pretty keen on gettin one for his wife's JK.

[tozrovr]

Ooooh! As soon as the dual PS carrier is back in stock, I'm all over this!

[rbgerrish]

Originally Posted by inebriatedmarmoset

Looks like the glue's holding up! ...hung on the rocks a few times too, but didn't really see any structural damage...ill let you know if it breaks any time soon though....

I did notice though that the holding loops for the proline tools were too big and so they just slide right through (you can see in the pic below) with the tire back on they sit on the rear bumper so they're even but ran em unsecured and lost the shovel ha....were they meant to not be a tight/snug fit? these tools were kinda new

anyway, still stoked to have installed this mount, got some compliments too and made a recommendation to find ya on rcc, Ryan! Hope you get another buyer soon! he seemed pretty keen on gettin one for his wife's JK.

Nice! I love the Portal Turrets! Nice job!

The tools should slide freely in the holes, you can wrap a tiny bit of tape around the handle of the tool to keep it at the level you like. (So it doesnt hit the bumper.)

Thanks!

All orders have been shipped, More JK racks in stock soon.

[rbgerrish]

Another Customers Rig:

[inebriatedmarmoset]

Originally Posted by rbgerrish

Nice! I love the Portal Turrets! Nice job!

The tools should slide freely in the holes, you can wrap a tiny bit of tape around the handle of the tool to keep it at the level you like. (So it doesnt hit the bumper.)

Thanks, man! Yea, gotta keep my rig defended! And good tip with the tape, I'll use it. =)


Gotta say, these jerry cans and holders look great, and def ups the scale factor on any rig!

[Statik]

Dual rubicon can holders gonna be back n stock at some point?

[rbgerrish]

Originally Posted by Statik

Dual rubicon can holders gonna be back n stock at some point?

Yup, I'd guess there will be a few more on the site by Thursday evening. Stupid 'real' job is taking up all my free time! ;)

[yoda@4x4]

Just order my stuff today can't wait to add the cool goodies my JK

[rbgerrish]

Originally Posted by yoda@4x4

Just order my stuff today can't wait to add the cool goodies my JK

Thanks! All orders placed yesterday evening and today will ship Monday.

[Statik]

Double Rubi holder is back?

[rbgerrish]

Just a quick update- I'm working to finish the next batch of cans and racks. Expect more by mid next week. Thanks!

[rbgerrish]

Thanks for waiting folks! All items are back in stock.

RYan