Help ready to build a super!

[wrenchinrock]

So im addicted enuff to crawling and building cars im reaky to build a super however to buid a great super you need great custom parts from great custom fab guys so heres where i want to start i want a ytown super agent chassis i like xr axles what do i have to do to xrs to make them work on a super and where can i buy or have a ytown super agent made or buy one any super info is welll um SUPER!

[CM9000]

wraith long axle shaft end. 4x. and creationfab tubes... and any other goodies you want.

im building one too. just torn down the axles today. they need some major work.
I got them so dirty. but hey..


good luck on your build. oh don't forget to shave the inside of the cases to fit the tubes

[wrenchinrock]

Originally Posted by crawlingman9000

wraith long axle shaft end. 4x. and creationfab tubes... and any other goodies you want.

im building one too. just torn down the axles today. they need some major work.
I got them so dirty. but hey..


good luck on your build. oh don't forget to shave the inside of the cases to fit the tubes

Sweet thanks that solves my axle issues i can at least start building those now to fond a cf super agent chassis! Or who i talk to to have one made!

[filotr14lsdude]

There was a super agent for sales not long ago.
Not
Sure if it sold or not.
4xford had it.

[CM9000]

he parted it out I think. I pmed him bout the axles. all vp hop ups. and only for 450. good deal though.

just buy a chassis you think you could run. agent or juice? there are some people on here who could cut them. just, it costs a bit more. garolite is cheap by the sheet. or g-10 as you would call it. lest than 10 for a 12x12 sheet.

[wrenchinrock]

Originally Posted by crawlingman9000

he parted it out I think. I pmed him bout the axles. all vp hop ups. and only for 450. good deal though.

just buy a chassis you think you could run. agent or juice? there are some people on here who could cut them. just, it costs a bit more. garolite is cheap by the sheet. or g-10 as you would call it. lest than 10 for a 12x12 sheet.

I have delrin and acess to a scroll saw i already have a freind making me a chassis based on the secret agent just stretched out ibreally want the 60/40 set up the secret agents are so famous for nd delrin is ok i just jave my heart set on a super agent ill run mybdelrin chassis tobget up andbrunning but in the end i want a ytown cf chassis if i knew who to talk to i would see if they would build me one!

[wrenchinrock]

As well im thinking about running 4 wheel steering any pros or cons? And whoo is the chassis maker over at ytown i would just assume have them cut me a new chassis?

[filotr14lsdude]

There was only a few super agents made.

If your building a super you should put on rear steer, supers really benefit from having it

[CM9000]

Originally Posted by filotr14lsdude

There was only a few super agents made.

If your building a super you should put on rear steer, supers really benefit from having it

Rear stear plus dig... Or idividual esc control.... they more than need it.

also you would benafit from it too. Supers are the most fun to drive.

[wrenchinrock]

Originally Posted by crawlingman9000

Rear stear plus dig... Or idividual esc control.... they more than need it.

also you would benafit from it too. Supers are the most fun to drive.

Yes i agree definatly planning on rear steer as well as dual smashed esc's :thumbup:

Sent from my ZTE-Z990G using Xparent BlueTapatalk 2