03-10-2008, 11:00 PM | #1 |
RCC Addict Join Date: Jan 2008 Location: www.rccrawler.com
Posts: 1,113
| Making an easy BTA
....my orders for my Clod Super should be here shortly, Ive been reading lots on Clod builds ...I just finished a skid plate and decided to try and make a BTA .I have Integy servo mounts on the way so I have to figure how to connect my servo after they arrive... I used some 2mm aluminum to cut out the main BTA piece and screwed one slightly thicker one on top as a brace,this was a lot easier to fabricate than thicker stuff since my tools are very basic for this build (hacksaw,wire cutter,file) I do recommend using some tin snips though, it would have cut the building time to less than half of the 2 1/2 hours that it took me. the hard part is coming up though I guess... any ideas on servo mounting are welcome? main problem I'm having is tightening the screws is sensitive, too hard limits movement and slightly softer feels like they will just fall out...how do I do it ? any criticism also welcome! Last edited by TheHeadHunter; 03-10-2008 at 11:10 PM. |
Sponsored Links | |
03-10-2008, 11:04 PM | #2 |
Rock Stacker Join Date: Jul 2006 Location: all over
Posts: 66
|
looks good, i am trying to make my own bta to. Look at the hand bros bta to get an idea of how to mount it. make it custom though. Good job so far.
|
03-10-2008, 11:08 PM | #3 |
RCC Addict Join Date: Aug 2005 Location: VARCOR
Posts: 1,826
|
Need to mount a draglink and show full steer before anyone can judge it. |
03-10-2008, 11:19 PM | #4 |
RCC Addict Join Date: Jan 2008 Location: www.rccrawler.com
Posts: 1,113
| |
| |