|
| LinkBack | Thread Tools | Display Modes |
05-02-2008, 10:37 AM | #1 |
Newbie Join Date: Jan 2008 Location: Austin
Posts: 48
| Super - Battery / motor / pinion favorites
Hey guys please post up you favorite combo for a super. I'm running 7 cell, 55t, 6T rear/7T front Generally I'm happy. Going to try 8 cell next What do you guys prefer? |
Sponsored Links | |
05-02-2008, 11:35 AM | #2 |
Pebble Pounder Join Date: Dec 2007 Location: Canby, Oregon
Posts: 177
|
I run 3 cell LiPo, 70T, 10T front and rear (I use the clod stall to save me from flipping) soon will try 4 cell and 8T or so pinions |
05-02-2008, 11:57 AM | #3 |
2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake
Posts: 8,328
|
I'm running a three cell A123 pack, tuned 55t motors, 10t front, 9t rear. Since going to the A123 cells, the rear pushes the front a little, so I'll probably go to 10t front and rear.
|
05-02-2008, 12:10 PM | #4 |
I wanna be Dave Join Date: Sep 2005 Location: USA
Posts: 11,196
|
11.1v Lipo, 60t CrawlMax's, 9T front and Rear.
|
05-02-2008, 12:52 PM | #5 |
Rock Crawler Join Date: May 2007 Location: lacey
Posts: 833
|
3 cell a123 (9.9v), 75t, 10t pinion front and rear. I need to drop the rear to a 9t though.
|
05-02-2008, 02:33 PM | #6 |
Pebble Pounder Join Date: Dec 2007 Location: Torrance
Posts: 115
|
65t on 11.1v lipo with 8T pinions on front and rear. So far, no major clod stall issues.
|
05-02-2008, 02:58 PM | #7 |
RCC Addict Join Date: Jun 2006 Location: Durham, NC, USA
Posts: 1,164
|
current set-up 6 or 7 cell, Kyosho MMs, 8 or 9 tooth |
05-02-2008, 03:12 PM | #8 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
35t handwound on 3s lipo, 6 tooth pinion.
|
05-03-2008, 12:56 AM | #9 |
Newbie Join Date: Jul 2006 Location: New Zealand
Posts: 7
|
A123 3 cell , crawlmaster brushless , 8t pinion - so far so good |
05-03-2008, 08:15 AM | #10 |
I wanna be Dave Join Date: Nov 2006 Location: spring hill TN
Posts: 2,959
|
3cell,45t and 7tooth
|
05-03-2008, 12:06 PM | #11 |
Pebble Pounder Join Date: Mar 2004 Location: Calgary AB Canada
Posts: 152
|
10cell e-flite 4000's, warrior 35t and 8t pinions
|
05-03-2008, 12:42 PM | #12 |
I wanna be Dave Join Date: Feb 2005 Location: Burnsville
Posts: 3,096
|
3 cell li-po, 55t motors, and 8 tooth pinions.
|
05-03-2008, 04:37 PM | #13 |
MODERHATER™ Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
3 cell lipo-custom 50 turns-7 tooth pinions
|
05-03-2008, 04:39 PM | #14 |
I wanna be Dave Join Date: May 2005 Location: CITY of CHAMPIONS!!
Posts: 2,086
|
6 cell sub c 35t warriors and 9t pinions
|
05-03-2008, 07:54 PM | #15 |
Quarry Creeper Join Date: May 2007 Location: melbourne, australia
Posts: 274
|
4 cell lipo and 6t pinions, with homewound 55-45t motors, maybe even 35t if i need a bit more speed
|
05-04-2008, 12:44 PM | #16 |
RCC Addict Join Date: Feb 2008 Location: tauranga north island new zealand
Posts: 1,786
|
6 or 7 cell 55s 8 9 pinions or 12 pinion for a bit of speed.
Last edited by vipxj; 05-04-2008 at 12:45 PM. Reason: forgot a word |
05-04-2008, 08:14 PM | #17 |
Rock Crawler Join Date: Sep 2007 Location: 42N 88.02W
Posts: 639
|
Thunder Power eXtreme V2 3850 3s Lipo 25C 55T Integy Lathes 8t Front & 7t Rear |
05-08-2008, 09:23 AM | #18 |
Newbie Join Date: Jan 2008 Location: Austin
Posts: 48
|
WOW, What a variety! Thanks for all of the replies. Sorry for Newb question here, and also sorry for not searching, but quickly...How many volts is...3 cell lipo many of you are running? |
05-08-2008, 09:38 AM | #19 |
Pebble Pounder Join Date: Dec 2007 Location: Canby, Oregon
Posts: 177
| |
05-08-2008, 01:06 PM | #20 |
Newbie Join Date: Jan 2008 Location: Austin
Posts: 48
|
Got it thanks. Seems to be a lot of loyalty towards the NMH, Lipo and separately for a123. In order to not get into one thing and then have obsolete chargers it seems like a quality versatile chargers like hyperion eos 606 series makes alot of sense. That way it'll charge just about anything i throw at it. Am I on the right track? I know the model number isn't right, but I know where to find the exact one I need from maxamps or other vendor. |
| |