05-19-2008, 02:49 AM | #1 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
| Finished the "Stick"!!!
Well it took a while to get it finished but here it is! I still waiting on one more Mamba Max to get here so for now it's running off just one. We have Hitec's front and rear(I'm pulling the JR8711's out the 2.2's to swap it out) a Mamba Max, Novak 55-50's, DX6i, Deans all around, custom made plate on the stick for the ESC and receiver, Venom 3000ma stick pack(Going Lipo this week), I have clod to maxx adapters on the way in the mail now, locked axle's, and a few more goodies on the way. I'm working another "Stick" project now. It will have Holmes Colbalt pullers in it! I'll have that up soon! I want to thank Yota for passing his chassis on to me for this build. I love it! I know everyone says there is nowhere here in Augusta for Supers, shoot me a message and I'll give you some killer spots! I'm going to get with Jason(JAI) and see if we can get a 2.2 and super comp before the summers out. Anywho, let me know what you think about the build! Thanks everybody from TCS, Holmes, CKRC, and Yota! You guys are awesome and go above and beyond with parts and tech support. You guys make RCing fun again! |
Sponsored Links | |
05-19-2008, 07:14 AM | #2 |
Rock Crawler Join Date: Jan 2008 Location: Arlington, TN
Posts: 624
|
That looks sweet, now let's take it out and run it............. |
05-19-2008, 07:20 AM | #3 |
RCC Addict Join Date: Dec 2005 Location: Tucson
Posts: 1,190
|
looks good cant wait to finish my hustler
|
05-19-2008, 08:43 AM | #4 |
Tire&Foam Extraordinaire Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas
Posts: 5,601
|
Is that a TTR BTA steering kit on the front? How is it working out for you? From the picture, it looks like the servo horn is very close to hitting the motor. I have three of the TTR BTA's, one is on my 2.2 and two are on my Super. I had to modify all three to get maximum steering. I was just curious to know if you had to do anything to yours in order to get it to perform well. Nice rig by the way.
|
05-19-2008, 12:23 PM | #5 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
It is, I did and I had to cut down the JR servo link like crazy to keep it off the motor....
|
05-19-2008, 01:30 PM | #6 |
Quarry Creeper Join Date: May 2008 Location: malvern
Posts: 233
|
Looks great. Hope you have a lot of fun with it.
|
05-19-2008, 01:47 PM | #7 |
Newbie Join Date: Oct 2007 Location: Martinez
Posts: 23
|
That looks cool man!!! That looks different to say the least, I have seen one or two before but they just "Wow" me each time. I will have to meet up with you and JIA once I get my crawler finished, I am located in Augusta/Martinez/Evans also. |
05-19-2008, 02:37 PM | #8 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
Sweet! Do that! |
05-20-2008, 08:06 PM | #9 |
Newbie Join Date: May 2008 Location: Montclair
Posts: 3
|
That's pretty sweet. But are ou running two brushless motors with that speed control, or are you using brushd motors?
|
05-20-2008, 11:47 PM | #10 |
Newbie Join Date: May 2006 Location: Northern Virginia
Posts: 21
|
Nice stick. Love the body!
|
05-21-2008, 03:46 AM | #11 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
Brushed 55-50's with the Mamba Max and a Venom 5000mia pack. Yea I like the body to but I didn't do it. Yota did. I bought the Stick from him and the body came with. I need to change it but I like it to much! |
05-21-2008, 08:07 PM | #12 |
Quarry Creeper Join Date: Oct 2006 Location: where fear and common sense don't get in the way
Posts: 451
| |
05-21-2008, 08:22 PM | #13 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
That my comp 2.2 rig. Chrome Edge chassis, MM ESC, Castle BEC, JR8711, Novak 55-50, Axial tranny and axles, Proline Hammers on Rockstar beadlocs, DX6i, custom plates and links, Aluminum knuck, arms and 3/4 extenders, aluminum panels, TCS pinions, Venom split 8 cell custom made 1600 mia, and a few other goodies.... |
05-21-2008, 08:41 PM | #14 |
Rock Crawler Join Date: Mar 2006 Location: Holiday, FL
Posts: 540
|
It's lookin good Kenny. Wish I could get back up there to run with you and JIA. One more thing why do you have clod to maxx adapters ont the way? It already had them or are you going to 23mm? Last edited by Shaun (yota); 05-21-2008 at 08:43 PM. |
05-21-2008, 09:09 PM | #15 | |
Quarry Creeper Join Date: Oct 2006 Location: where fear and common sense don't get in the way
Posts: 451
| Quote:
.....Sweet Rig, do you mind if I send you a PM, would like to ask a few Q's if you don't mind..... | |
05-21-2008, 09:32 PM | #16 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
| Its for another project I'm working on. I'm building a Stick with HH Pullers on it....I figured out how to make it work.... But yea get back over here and lets go crawl! I found a sweet spot for Super's here. But thanks again for all the help and the roller! And the other question, shoot me a PM and I'll help out anytime daddy-o! |
| |