| |
05-14-2008, 01:49 AM
| #1 |
| Rock Stacker Join Date: May 2008 Location: seattle
Posts: 52
|  Just ordered! Hello all I just ordered my CR-01 today and cannot wait for it to get here i am counting the minutes! so here is what i got! CR-01 kit of course! (only the best) Novak rooster Crawler esc and 55t motor integy 7.2v 3000 battery futaba 2ph 2 channel AM/s3003 servo If anyone has any tips or suggestions for me i would love to get that! I am going to paint the body a light/sky blue (i had a coach in high school that had an old FJ in sky blue and i remember driving and riding in it and have fond memories of it!) so I will paint it that color but am going to bash it up a little bit get some rust spots and rub through on the fendors also some dents and what not on the roof! I am going to take tons of pics during the build and will post them on here! cant wait to show you guys! chris  |
|  |
| Sponsored Links | |
| | |
|
05-14-2008, 04:01 AM
| #2 |
| Newbie Join Date: Nov 2007 Location: Tasmania
Posts: 30
|  I'd use a different servo, they don't have enough power from my experience. |
|
| |
|
05-14-2008, 05:39 AM
| #3 | |
| Newbie Join Date: Nov 2007 Location: Japan
Posts: 26
| Yes, I agree! Quote:
 . Get a more decent one. | |
|
| |
|
05-14-2008, 06:24 AM
| #4 |
| Gold Star Baby!   Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 6,821
| Nice truck drove one last weekend Tamiya does it again |
|
| |
|
05-14-2008, 11:56 AM
| #5 |
| Rock Stacker Join Date: Apr 2008 Location: Orange Park
Posts: 61
| I'm in the same boat, mine should be arriving at my lhs on Friday, can't wait. |
|
| |
|
05-14-2008, 02:02 PM
| #6 |
| Quarry Creeper Join Date: Aug 2005 Location: newport
Posts: 382
| the hitec 645mg works nice in mine about 35 bucks Though you will need to get a different servo saver if you want to use one Ofna's metal top gas car savers work good Futaba servos also have a short lead wire, the hitec is longer and reaches all the way back |
|
| |
|
05-14-2008, 02:09 PM
| #7 | |
| RCC Addict Join Date: Dec 2004 Location: HELL.....
Posts: 1,587
| Quote:
| |
|
| |
|
05-14-2008, 05:52 PM
| #8 | |
| I wanna be Dave Join Date: Apr 2005 Location: It's good to be a Pirate!
Posts: 7,164
| Quote:
| |
|
| |
|
05-14-2008, 06:17 PM
| #9 | |
| Quarry Creeper Join Date: May 2006 Location: Volcano, Hawaii
Posts: 429
| Quote:
| |
|
| |
|
05-15-2008, 12:00 AM
| #10 |
| Rock Stacker Join Date: May 2008 Location: seattle
Posts: 52
| Ya i guess reading that now it sounds creepy LOL It was just my first FJ I ever drove ad it was awsome! I am planning on replacing the servo early on a few buddies of mine have a few different servos I can use no big deal! hahahaha i will keep you guys updated! |
|
| |
|
05-18-2008, 09:00 PM
| #11 |
| Rock Stacker Join Date: May 2008 Location: seattle
Posts: 52
| What an amazing build! i just got done today after about 15 hours of building! this is such an amzing truck! so happy i went with this and not the axial! I look at the axial and laugh the grip on this rig is amazing and with the 55 turn goat it can crawl anything! my buddys all have PTIs and i cant wait to show them up tomorrow! |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
