| |
07-13-2009, 09:20 PM
| #1 |
| Newbie Join Date: Dec 2008 Location: canada
Posts: 4
|  cr01 pinon
hi guys, anyone know the pitch on the cr01 (48?) and is anyone using a goat brushless with a pinon in it? (23,26?) |
|  |
| Sponsored Links | |
| | |
|
07-14-2009, 01:57 AM
| #2 | |
| Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| Quote:
| |
|
| |
|
07-19-2009, 02:45 PM
| #3 |
| Pebble Pounder Join Date: Jul 2008 Location: Tamworth, England.
Posts: 124
|
I am running a Goat in my heavily modified CR-01, I run a 16 tooth pinion. The 16 gives a fair wheel speed, could probably go up to an 18, but there is plenty of speed with the 16. The pinion`s are 0.6 module http://www3.towerhobbies.com/cgi-bin...?&I=LXGJ67&P=7 http://www3.towerhobbies.com/cgi-bin...?&I=LXGJ68&P=7 http://www3.towerhobbies.com/cgi-bin...?&I=LXGJ69&P=7 http://www3.towerhobbies.com/cgi-bin...?&I=LXGJ70&P=7 |
|
| |
 |
| |
Linear Mode
