RCCrawler Forums

mike5721947 · 07-20-2005, 09:11 PM

well im wondering what servos i should get to run on my custom tlt (its going to be running a custom frame, stampede tranny, sub c battery, tlt axles, hpi split 5 spoke rims and geolandar tires. (its a copy (sort of) of the courier trail rig farther down the page) im running independent rear steer with a modded tq3 (is $80 cnd a good price for a brand new tq3 and receiver?)

CSR · 07-20-2005, 09:22 PM

Quote:

Originally Posted by mike5721947

(is $80 cnd a good price for a brand new tq3 and receiver?)

What is the currency exchange on that.... about $30 American? J/K

I think $80 cnd is kinda high, you can buy new TQ3 systems on Ebay for $20-$30

http://search.ebay.com/tq3_W0QQfkrZ1QQfromZR8

Will · 07-20-2005, 09:36 PM

$80 is outrageous for a tq3 maybe like $25 shipped and a hitec 645mg is a great servo but for a few extra dollars you can get the hitec 5645mg digital servo that has alot more tourque

mike5721947 · 07-20-2005, 09:42 PM

80.00cnd=$65.5301 USD
thats brand spanking new from my LHS (with crystals)

if i have to go ebay i will but i donthave an account (i can use a friends account though

)

rckjeep · 07-21-2005, 12:34 AM

I run Futaba S3305 servo's on my TLT. They are Cheaper than 645's and higher quality. No issues what so ever. I even ran one on my TXT without a problem. If you want to run 4ws on a two channel radio by a futaba & a hitec. They are wired diffently and it should work great.

jakhammer · 07-21-2005, 01:11 AM

i like the hitec 645mg servos myself. they seem to work great and I have never had a problem with one.

Chris

RCMFMaxxMan · 07-25-2005, 07:34 PM

I am using a Traxxas 2055 (stock emaxx steering servo). It works pretty well. It was lying around so it didn't cost me anything. But at $25 it is good. If i had the extra money i would go for the hitec 645mg. I do have one but it is going on my mad force crawler instead...for obvious reasons.

07-20-2005, 09:11 PM	#1
mike5721947 Rock Stacker Join Date: Jul 2005 Location: port coquitlam, bc, canada Posts: 51	good servos to use on a tlt? well im wondering what servos i should get to run on my custom tlt (its going to be running a custom frame, stampede tranny, sub c battery, tlt axles, hpi split 5 spoke rims and geolandar tires. (its a copy (sort of) of the courier trail rig farther down the page) im running independent rear steer with a modded tq3 (is $80 cnd a good price for a brand new tq3 and receiver?)

07-20-2005, 09:36 PM	#3
Will Quarry Creeper Join Date: Jan 2005 Location: New Orleans Posts: 265	$80 is outrageous for a tq3 maybe like $25 shipped and a hitec 645mg is a great servo but for a few extra dollars you can get the hitec 5645mg digital servo that has alot more tourque

07-20-2005, 09:42 PM	#4
mike5721947 Rock Stacker Join Date: Jul 2005 Location: port coquitlam, bc, canada Posts: 51	80.00cnd=$65.5301 USD thats brand spanking new from my LHS (with crystals) if i have to go ebay i will but i donthave an account (i can use a friends account though )

07-21-2005, 12:34 AM	#5
rckjeep I wanna be Dave Join Date: Jun 2004 Location: San Jose Posts: 5,207	I run Futaba S3305 servo's on my TLT. They are Cheaper than 645's and higher quality. No issues what so ever. I even ran one on my TXT without a problem. If you want to run 4ws on a two channel radio by a futaba & a hitec. They are wired diffently and it should work great.

07-21-2005, 01:11 AM	#6
jakhammer Pebble Pounder Join Date: Dec 2004 Location: Coleman Posts: 122	i like the hitec 645mg servos myself. they seem to work great and I have never had a problem with one. Chris

07-25-2005, 07:34 PM	#7
RCMFMaxxMan RCC Addict Join Date: Jun 2004 Location: ORegon Posts: 1,002	I am using a Traxxas 2055 (stock emaxx steering servo). It works pretty well. It was lying around so it didn't cost me anything. But at $25 it is good. If i had the extra money i would go for the hitec 645mg. I do have one but it is going on my mad force crawler instead...for obvious reasons.

Sponsored Links

RCCrawler Forums

Thread: good servos to use on a tlt?