RCCrawler Forums

BENDER · 02-13-2006, 06:08 PM

Quote:

Originally Posted by Unimoger

well guys, I have run 10 packs through it now and all I have to say is, if you are planning on building a comp TLT 2.2 rig, the " SW2 " chassis is the ONLY way to go, it is 100% Bad Azz !!!!

Bender, as a machinist myself, my hat goes off to you, this is the best chassis I have ever run!

Thanks for the compliment Ben.

Unimoger · 02-19-2006, 06:17 PM

set up a comp course today, camera died, but I managed to get 1 good pic on the first gate.

FFRCJosh · 02-19-2006, 08:37 PM

Atleast you got one pic

I got to get myself a SW2 chassis and some Rock Rings

Josh

Got Rocks? · 02-19-2006, 08:52 PM

how bout them steerng pics unimoger im still waiting!

Unimoger · 02-19-2006, 08:59 PM

got rocks, I have tried and tried, but my camera won't focus that small. Let me know what you want and I will write it out in a PM. Send me a message.

badger · 02-20-2006, 11:22 AM

Quote:

Originally Posted by Unimoger

It looks like it turns as well as the RCP-Tracks rigs I built.

Nice Job!

Unimoger · 02-20-2006, 11:36 AM

Quote:

Originally Posted by badger

It looks like it turns as well as the RCP-Tracks rigs I built.

Nice Job!

Yes it does, thanks Badger. Got rocks, go to nor-calrcrc.com and look at badgers page with the rcp tracks album. His pics are much better than mine and he is the one who told me how to do it orginally.

badger · 02-20-2006, 11:40 AM

Quote:

Originally Posted by Got Rocks?

how bout them steerng pics unimoger im still waiting!

I will take extreme close up shots of a stock stub axle and a finished one tonight so you can see how much I took off it. It's really easy and does not take more then a minute with a bench grinder.

I'll post the pics tonight on the Nor-Cal site and PM you.

moonbuggy · 02-21-2006, 04:01 PM

hey badger when you get those posted up can you give us the link?

FFRCJosh · 02-21-2006, 10:30 PM

^^^ Same, I would like to see a EXTREME CLOSE UP!!!

Unimoger · 02-22-2006, 10:01 AM

check the www.nor-calrcrc.com site, you should see some pics now.

Unimoger · 04-10-2006, 01:24 PM

well the cj-8 now has front dig with maxx shafts and I lowered the truck a little for more stabilty, I am running 2 1/2" cog, seems to work awesome. more pics to follow.

1BadJeepBruiser · 04-10-2006, 01:50 PM

Pics Pics Pics, more Pics!!!

I never saw that pic on the comp course, looks good though...cant wait for my cj

mike

Unimoger · 04-10-2006, 01:53 PM

Thanks Mike, yeah I will get some more pics, badger wanted some of the front dig, so I better post those too. Big thanks to Miniwheeler for the front dig help, he is " DR.DIG " . I ran the cj at lunch today, managed to bust a stub axle, steering knuckle and a axle housing. Guess I am a little rough on the junk, oh well, I will re-build it tonight in the shop and get some pics for everyone.

Unimoger · 04-11-2006, 09:31 PM

ok, here are the pics. Nobody can say that I don't run my trucks like I stole em' This is the 2nd time I have broke the same side and shaft and housing on this truck.

clodbrett · 04-11-2006, 09:41 PM

Man, you must have rolled that bizzy like a doobie ;) Kyosho should make a small scale twin force/mad force axle.. It would be the new beefcake for these Tltish rigs.

_bR3T7

clodbrett · 04-11-2006, 10:02 PM

double post
stupid internet

miniwheeler · 04-11-2006, 10:20 PM

Its allways the right front

RANOVRU · 04-12-2006, 10:46 AM

Looks awsome Ben. Is it just me or does it turn a little sharper to the left??

Either way the turning is outstanding. Nice job!

Unimoger · 04-12-2006, 11:46 AM

Thanks, actually it steers really well both ways. very good in the corners especially with the front dig.

02-19-2006, 06:17 PM	#22
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	set up a comp course today, camera died, but I managed to get 1 good pic on the first gate.

02-19-2006, 08:37 PM	#23
FFRCJosh Quarry Creeper Join Date: Feb 2006 Location: over there Posts: 264	Atleast you got one pic I got to get myself a SW2 chassis and some Rock Rings Josh

02-19-2006, 08:52 PM	#24
Got Rocks? RCC Addict Join Date: Jul 2005 Location: Provo Posts: 1,868	how bout them steerng pics unimoger im still waiting!

02-19-2006, 08:59 PM	#25
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	got rocks, I have tried and tried, but my camera won't focus that small. Let me know what you want and I will write it out in a PM. Send me a message.

02-21-2006, 04:01 PM	#29
moonbuggy Quarry Creeper Join Date: Jun 2004 Location: Ventura Posts: 326	hey badger when you get those posted up can you give us the link?

02-21-2006, 10:30 PM	#30
FFRCJosh Quarry Creeper Join Date: Feb 2006 Location: over there Posts: 264	^^^ Same, I would like to see a EXTREME CLOSE UP!!!

02-22-2006, 10:01 AM	#31
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	check the www.nor-calrcrc.com site, you should see some pics now.

04-10-2006, 01:24 PM	#32
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	well the cj-8 now has front dig with maxx shafts and I lowered the truck a little for more stabilty, I am running 2 1/2" cog, seems to work awesome. more pics to follow.

04-10-2006, 01:50 PM	#33
1BadJeepBruiser Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast Posts: 8,864	Pics Pics Pics, more Pics!!! I never saw that pic on the comp course, looks good though...cant wait for my cj mike

04-10-2006, 01:53 PM	#34
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	Thanks Mike, yeah I will get some more pics, badger wanted some of the front dig, so I better post those too. Big thanks to Miniwheeler for the front dig help, he is " DR.DIG " . I ran the cj at lunch today, managed to bust a stub axle, steering knuckle and a axle housing. Guess I am a little rough on the junk, oh well, I will re-build it tonight in the shop and get some pics for everyone.

Sponsored Links

04-11-2006, 09:31 PM	#35
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	ok, here are the pics. Nobody can say that I don't run my trucks like I stole em' This is the 2nd time I have broke the same side and shaft and housing on this truck.

04-11-2006, 09:41 PM	#36
clodbrett Join Date: Mar 2004 Location: Washington state Posts: 110	Man, you must have rolled that bizzy like a doobie ;) Kyosho should make a small scale twin force/mad force axle.. It would be the new beefcake for these Tltish rigs. _bR3T7

04-11-2006, 10:02 PM	#37
clodbrett Join Date: Mar 2004 Location: Washington state Posts: 110	double post stupid internet

04-11-2006, 10:20 PM	#38
miniwheeler Rock Crawler Join Date: Nov 2005 Location: dallas Posts: 866	Its allways the right front

04-12-2006, 10:46 AM	#39
RANOVRU Quarry Creeper Join Date: Dec 2005 Location: Mechanicsville, VA Posts: 464	Looks awsome Ben. Is it just me or does it turn a little sharper to the left?? Either way the turning is outstanding. Nice job!

04-12-2006, 11:46 AM	#40
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	Thanks, actually it steers really well both ways. very good in the corners especially with the front dig.

RCCrawler Forums

Thread: Agent Orange stage 2 buildup SW2