RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Tamiya TLT Crawlers (http://www.rccrawler.com/forum/tamiya-tlt-crawlers/)
-   -   TLT Crawler Picture Archive (http://www.rccrawler.com/forum/tamiya-tlt-crawlers/6756-tlt-crawler-picture-archive.html)

Jersdunz 12-30-2006 09:49 PM

here is my new christmas pres to me....lol i couldn't have built it with out the information based off of these forums so to all who are on here thanks much...it has a pede tranny, integy lathe 55 turn, moabs, associated bead locks and my own dirty hand cut bulu look alike plates...


Crawler downunder 01-02-2007 08:48 PM

3 Attachment(s)
This is my TLT BRONCO, running stampede tranny, 2.2 Dawgs, locked all diffs, Traxxis links top and bottom,TNX Shocks.

Clintster 01-07-2007 01:35 PM

Here's mine and hodges996 crawlers




dezfan 01-07-2007 07:25 PM

The Shadow
1 Attachment(s)
Here is my latest addition to the stable.

The turtle 01-09-2007 02:32 AM

The new kuala. By the turtle!


rockbender 01-10-2007 08:05 PM

1 Attachment(s)
here's mine with a Koala Chassis by M&L.

rockbender 01-10-2007 08:06 PM

1 Attachment(s)
ok will do

iwantoffroad 01-11-2007 12:29 AM

My Competition Rig “Hayward” now water proofed
My Competition Rig “Hayward” now water proofed with pictures and new updates

pede tranny
pede shafts
axles shaved, locked, trimmed, greased and shimmed
tq3 with rear steer mod
hs 645 mg
the usual
lots of time put into it

extensive build up recap

the build up thread



ROC LOBSTER 01-11-2007 11:12 PM

Wow, I Need A Bigger Photo

robbo989 01-11-2007 11:26 PM

It needs a new tranny, chassis and I'm gonna extend it another inch and it should be good!

LigouriRd. 01-15-2007 09:51 AM

Here's my crawler, body's new but the chassis has been beaten up a bit...luckly its hard to tell.
Tracer Chassis
TEU-101BK w/stock tamiya can motor
Futaba S3010 servos front and rear
Traxxas extra long plastic shocks w/45wt oil
Hpi wheels w/moabs
Full ball bearings
Traxxas slipper pegged centre diff
Sort of posi front and rear diffs...the spider gears are shimmed with belville washers to provide differential resistance but still allow some differential action. The tension is enough to pull the truck up rocks without one wheel spinning however it still turns well on high traction surfaces like asphalt.

Maciek 01-17-2007 02:20 AM

Custom Jeep Wrangler 2.2

- Handmade chassis
- Integy 55T
- Pede tranny 83T/19T (tamiya module)
- Jeep Wrangler Rubicon body
- Tires -Yokohama Geolander
- ESC Tamiya TEU-101BK
- servo Acoms AS-16 :mrgreen:

http://img170.imageshack.us/img170/9...6496hu0.th.jpg http://img444.imageshack.us/img444/6...6556uz4.th.jpg http://img230.imageshack.us/img230/3...6466kz4.th.jpg

Action Video (~48MB wmv)

SWFLCrawler15 01-19-2007 06:18 PM

3 Attachment(s)
integy 55t
e maxx shocks
all t's
narrowed stampede wheels
stampede tranny

johnnearaugusta 01-19-2007 09:25 PM

4 Attachment(s)
some pics of my P4

LockedinLow 01-21-2007 06:04 PM

Heres my Torsion Tlt

redram360 01-24-2007 05:01 PM

Finally got my Dodge done
I finally got this thing done, seems work takes up most of my time. Anyways, I cut the frame out of an aluminum bumper reinforcement from a car, reciever and controller from an old car I have. I also had some servos from my old tmaxx and the tires/wheels from a HPI nitro mt.

John Deere 01-25-2007 01:43 AM

2 Attachment(s)
Specson FLASH:
XRS ESC Pede shafts
Pede tranny ( locked )
Locked tlt axels
RPM wheels I found somewhere.
Masher tires. (will be masher 2ks soon) on some beadlocks
Deans plugs
Will have reciver pack soon
F-650 Body.

RivBlueNoma 02-04-2007 12:02 PM

*TLT axles locked with quick steele
*Home made chassis
*Home built servo/upper link mounts
*Maxx shocks
*Pede tranny locked with quick steele, metal top and center gears
*Driveshafts built with pede shafts and steel yokes at the axles. Plastic yokes at tranny as a
weak link
*Nitro Rustler wheels-single narrowed
*M2k tires, 3 oz weight in fronts, 2 oz in rears
*Home built links from 6-32 and sleeved with aluminum
*Parma 454ss body-slightly trimmed
*645mg servo
*Tazer ESC

Yesterday was my 1st time driving it, or any crawler for that matter. Took 6th place with her. "thumbsup"



code3pse 02-04-2007 01:11 PM

Here is my tlt crawler.

andres-tavares 02-04-2007 01:58 PM

stock tlt
mtroniks viper esc
traxxas tq3
integy 45t
locked central diff with silicon
locked front and rear diffs spider way

onto the pictures


click the pictures

All times are GMT -6. The time now is 11:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com