heres my txt... TXTurtle. motor- stock tranny- stock/gd600 shafts- revo axles- txt jb welded chassis- stock chopped up tires- stock for now moab XLs soon body- some maxx truck body, i dunno ESC- dynamite tazer measurements WB- 15 1/2" GC- 4 1/8" length- 21" witdh- 15" height- 9" i think weight- heavy, not sure. http://coloradok5.com/photos/data/500/DSCN0947.JPG http://coloradok5.com/photos/data/500/DSCN0952.JPG |
Black Betty 3 Attachment(s) Black Betty TXT 1 LRP F1 ESC Stock Motors 9 tooth pinions Hitec 945 Servos Custom servo mounts Custom chasis Cut & raised trans Max Shafts Trayback ute Moab XL'S on Velocities Custom skidplate |
|
3 Attachment(s) BEAVER Truck base: Txt Esc: Super Rooster Motor(s): 55t Lathe Servo(s):HS645MG Trans:Txt Axles:Txt j/b weld Tires: stock WB:17.5" |
The Red Baron Slighty hacked chassis 17" WB GD600@ 85:1 Integy 45t Novak Super Rooster XTM x-cellarator shocks JB weld in all the right spots HS-645MG in back,HSC-5998TG in front RC4WD steering knuckles Custom shafts, skid and servo mounts Moabs on stocks or Redrocks on X-75's Rock pleezer slammed M-8 with indy. rr str http://i141.photobucket.com/albums/r50/climberx/RB2.jpg http://i141.photobucket.com/albums/r50/climberx/RB1.jpg http://i141.photobucket.com/albums/r...rx/RBframe.jpg |
my 2.2 Juggernaut 12.5" wheelbase 12" width 1.6" diff clearance 4" center clearance 2650g (5.8lbs) rtr weight 4:1 geared axles "thumbsup" locked Tamiya Dyna Blaster tranny aluminium tube frame Imex All Tīs and narrowed Pede rears front servo Airtronics 94358 , rear 94161 Axi 2212-26 and Quark 33A pro car 7.4V 1250mAh lipo , enough for 30-40 minutes runtime http://img254.imageshack.us/img254/2...2023uy8.th.jpg http://img254.imageshack.us/img254/2...2024mw9.th.jpg http://img301.imageshack.us/img301/7...2002wq4.th.jpg http://img301.imageshack.us/img301/7...2001id2.th.jpg http://img301.imageshack.us/img301/2...1999ry1.th.jpg |
3 Attachment(s) WHEEL BASE - 17 1/4" TIRE DIAMETER - 7 1/2" WIDTH - 14 1/2" DIFF. CLEAR. - 2 3/8" TRANNY CLEAR - 4" TOP OF FRAME - 8 1/2" WEIGHT - 10 LBS. SHOCKS - SAVAGE (INTEGY) REVO SHAFTS LINKS - 5/16" ALUMINUM SERVO(S) - 645MG (4WS) BENDER - BTA SERVO MOUNTS - SAVAGE SHOCK MOUNTS RC4WD - GRU - 23MM WHEEL ADAPTERS - UPPER LINK BRACES SHOES - PROLINE MOAB XL on COMMANDO NARROW BEADLOCKS |
TXT-1 Novak EVX Dual Venmom 3000 batts cheap tower hobbies radio futaba reciver single hitec hs-645mg, soon (hs-805bb with 5cell 6v flat reviver batt pack) Revo shafts JB welded diffs cut chassis cut/raised trans dual stock motors/ stock pinions (9 tooths in mail) custom servo mounts stock shocks removed cantis narrowed wheels (rc4wd narrow beadlocks in the mail) cut and reversed stock tires WB: 15.25" links flipped top to bottom PICS: http://s20.photobucket.com/albums/b2...tyjeepzj/?sc=1 http://i20.photobucket.com/albums/b2...j/DSC02445.jpg |
My skippy built txt I got this in a trade a little bit ago and have done a few things to it since. http://www.imagestation.com/picture/...a/ebd284f1.jpg Narrowed and bobbed nylint body Custom chassis/roll cage/skid TXt tranny/unknown transfer/txt axles Integy savage shocks 55t lathe/super rooster/JR 650 |
heres a few updated pics of my rig http://i93.photobucket.com/albums/l4...1/DSCF0045.jpg http://i93.photobucket.com/albums/l4...1/DSCF0043.jpg |
Hawaiian Txt Hers my TXT..KEEPING IT REAL!! Cut TXT chassis locked axles 5955 digital servos x2 TKR2 Novak voltage regulator RPcustoms shocks 55lathe GD600 stock tranny clocked The original skid plate from "Rocktopus" by Bender Parma Tundra bod Proline Cheyenne Beadlocks dyed w/40series MASHERS Narrowed Axial BEadlocks w/Moab XLS DX3 http://i98.photobucket.com/albums/l2...G/IMG_7320.jpg http://i98.photobucket.com/albums/l2...G/IMG_7350.jpg http://i98.photobucket.com/albums/l2...IMG_7352-1.jpg http://i98.photobucket.com/albums/l2...G/IMG_7357.jpg |
My Modified TXT-1 (after first run) Hi all, we have a crawler team in Hong Kong, and now is time to post my TXT-1 here. http://rc-one.com/phpwind/attachment...210e34fef5.jpg http://rc-one.com/phpwind/attachment...d69faedc89.jpg |
My TXT's Just a few pics of my TXT's The blue is a stock chassis/trans setup cut and modded, GD600/55t lathe, 40 series wheels/tires cut and narrowed The grey is under construction, but it has an MFM chassis/TXT axle/Stealth trans/70T handwound.. Outside paint... Kinda like the primer look, reminds me of my first car and truck.... Let's keep the pics coming..... http://i180.photobucket.com/albums/x218/jjmz6/side.jpg http://i180.photobucket.com/albums/x...z6/wiggle2.jpg http://i180.photobucket.com/albums/x...718_edited.jpg http://i180.photobucket.com/albums/x...6/IMGP0716.jpg |
http://i115.photobucket.com/albums/n...l/chassis6.jpg http://i115.photobucket.com/albums/n...l/chassis5.jpg Well, I was planning on building a crawler, but then I realised I had no where to actually crawl. So I spent $4000 and built a racer instead. Sold it at Xmas to build my beloved GorillaMaxx. Its all good.... |
WB--16in. Esc--SR Shocks--Savage Chassis--stock chopped Tires--LST's Wheels--Maximizers with Ace wideners Tranny--E maxx with gd600 Motor--45t Axles--TXT Shafts--Revo Radio--Tq3 with rear steer switch Servos--1/4 scale http://i2.photobucket.com/albums/y22.../Trucks001.jpg |
well, here's mine in current trim Wb--16.5 ish ESC--SD Shocks--stock, drooped Chassis--stock, bottom cut Tires, 40 series moabs Wheels--proline trans--stock with dual gd600's motor--dual integy 55t axles--txt rc4wd stainless shafts Shafts--revo radio-- futaba t3pk, rear steer on thumbwheel Servos--Hitec HS775mg 1/4 scale Batts--dual electrifly 3600 7 cells http://i137.photobucket.com/albums/q...0722071453.jpg http://i137.photobucket.com/albums/q...0717071534.jpg http://i137.photobucket.com/albums/q...0716071426.jpg |
http://i148.photobucket.com/albums/s...r/crawler2.jpg http://i148.photobucket.com/albums/s...r/crawler3.jpg http://i148.photobucket.com/albums/s...or/crawler.jpg -TXT-1 axels & tranny -Ball bearings -Home made chassis -Home made link/shock/servo mounts -Narrowed cheyenne beadlocks -Integy 55T -GD-600 -Front bta steering -Savage shocks -DX 3.0 -Tekin Rebel 2 -WB 440mm -GC 95mm |
My TXT 4 Attachment(s) Cut chassis, 16" wheel base 55T lathe mated to a GD600 - stock trans Narrowed and rotated 40 series Moabs on narrowed Proline wheels- custom rock rings, SS faux lugs & bead bolts 4 wheel steering, Hitech 645 servos Proline F650 salvaged from a trade.... Needs body posts cut, and electronics finished... |
4 Attachment(s) txt chassis txt axles novak brushless 5998tg towerpro mg945 savage shocks spectrum radio, rec |
A couple shots of my TXT trail / basher I recently completed http://warcrc.org/Pictures/build/txt/txt_46.JPG http://warcrc.org/Pictures/build/txt/txt_44.JPG http://warcrc.org/Pictures/build/txt/txt_48.JPG http://warcrc.org/Pictures/build/txt/txt_47.JPG |
All times are GMT -6. The time now is 02:20 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com