RCCrawler Forums - CC-01/XC owners.... Please read.

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tamiya XC/CC01 (http://www.rccrawler.com/forum/tamiya-xc-cc01/)

- - CC-01/XC owners.... Please read. (http://www.rccrawler.com/forum/tamiya-xc-cc01/191020-cc-01-xc-owners-please-read.html)

I can sense a lot of good stuffs coming out of this "thumbsup"

Bump this to the top to get more people spreading the word!!

Done... asked for knuckles (the blue thingies... I think thats their technical name) and steering stuff with more precision. Ball bearing steering like on my RC-10 team car would rock.... hmmmm wonder if I could adapt it....

Hi everyone!

This is my first post here!

I think this is a great idea and I too sent email requesting some hop up options for the CC01 chassis, particularly steering and suspension.

Great little model with so much potential yet so little performance upgrades.

:D

Request sent. Steering parts and rear suspension links etc.

Done done and done"thumbsup"
Thanks for getting the ball rolling, toyo!

Done, thanks for making this possible Toyo. Its always nice to have options avaliable

do you think we could get them to make cvd's as well?

Ive sent email,fingers crossed. Tanks toyo.

Quote:

Originally Posted by Nitro_Geezer_UK (Post 1982323)

do you think we could get them to make cvd's as well?

They already make universals that bolt in, intended for another application but are a direct fit for the CC-01 rigs... just needs to be made out of steel rather than aluminum..........

GPM aluminum universals, approx 30 minutes of use:

http://farm3.static.flickr.com/2428/...ae7b109b86.jpg

I received an email from GPM

Thank you very much for your email to GPM Racing.

Yes, we will plan for parts for Tamiya CC01 and anything updated will be sent for you.

Besides of CC01, will you interest in another model parts that make for Tamiya?

How polite and helpful! Looking forward to seeing what they come up with.

Got this email from GPM this morning

Quote:

Dear all fans of Tamiya CC-01,

This is Miss Clara Fung of GPM RACING in HK. I am sure I have replied to your emails before about your first enquiry to us of your urgent need of the options for this car. I am so glad to tell you all here that the pricelist is finally out, and the production of the parts have just started, we will make around 100 sets in our first production, I want all of you to send your orders to me now and then we will issue to you sales order to confirm with shipping cost. So I can make sure everyone of you can be well-reserved with these parts during our first production. When you send in your order by email to me, please bare in mind to tell me how many packs you need per item and then the color you want. At this moment, we will supply to all of you directly until we find a suitable distributor to promote this line ! I hope this will be happy to all of you. And I am so excited to let all of you know that our company can offer to all of you a discount of 15% off if your orders are sent to us and paid the deposit of 10% of the total amount before 20th September !!

Here please find the attachment of the pricelist, since we have checked that we have compatiable items we have made for TA-02 that can be used in this car, we also added them in the pricelists, you will see different part names starting with TA........ And the following items are in stock now for immediate shipment. Anyone wants to order these items and have them shipped out first, please remark to me and I will arrange for you as soon as possible.

Thank you for all of your support and great opinions !! And we will surely make more parts for this lovely car in the coming months !

I am sincerely looking forward for your feedback to me soon.

Cheers !

Best Regards
Clara Fung
Sales Department
Chin Ngai Hobby Limited

Here's the list.....
ALLOY C-HUB - 1PR $ 13.00
CC048 ALLOY STEERING ASSEMBLY - 1SET $ 13.00 If this is exactly what it says it is......YEAH!!
CC054 ALLOY FRONT SUSPENSION ARM - 1PR $ 13.00
CC055 ALLOY REAR SUSPENSION ARM - 1PR $ 13.00
TT010 ALLOY WHEEL HEX DRIVE ADAPTOR WITH PINS & SCREWS - 4PCS SET $ 4.50
TA2243 ALLOY FRONT UNIVERSAL SWING SHAFT (43MM) - 1PR $ 10.00
TA2004 ALLOY LIGHT KING PIN SET FOR ORIGINAL C-HUB - 4PCS $ 4.80
TA2021 ALLOY FRONT KNUCKLE ARM - 1PR (FOR TA02, TA03) $ 14.80
ADP070 PLASTIC FRONT/REAR BALL TOP DAMPER (70MM) WITH WASHERS & SCREWS - 1PR SET $ 13.80

Quote:

Originally Posted by constantmotion (Post 1989295)

Got this email from GPM this morning

Here's the list.....
ALLOY C-HUB - 1PR $ 13.00
CC048 ALLOY STEERING ASSEMBLY - 1SET $ 13.00 If this is exactly what it says it is......YEAH!!
CC054 ALLOY FRONT SUSPENSION ARM - 1PR $ 13.00
CC055 ALLOY REAR SUSPENSION ARM - 1PR $ 13.00
TT010 ALLOY WHEEL HEX DRIVE ADAPTOR WITH PINS & SCREWS - 4PCS SET $ 4.50
TA2243 ALLOY FRONT UNIVERSAL SWING SHAFT (43MM) - 1PR $ 10.00
TA2004 ALLOY LIGHT KING PIN SET FOR ORIGINAL C-HUB - 4PCS $ 4.80
TA2021 ALLOY FRONT KNUCKLE ARM - 1PR (FOR TA02, TA03) $ 14.80
ADP070 PLASTIC FRONT/REAR BALL TOP DAMPER (70MM) WITH WASHERS & SCREWS - 1PR SET $ 13.80

Are there any pics? cant see any on their website!

Quote:

Originally Posted by Nitro_Geezer_UK (Post 1989299)

Are there any pics? cant see any on their website!

They haven't put them up for sale yet....they are giving us first dibs at them.

I have requested some pics of the parts.....would like to see what the steering assembly is exactly.

SWEET!
Whats the part number for the cvds that Toyofast uses, they would probably last more than 30mins in my rig

The ones he bought was TA2243B....it's the same ones listed. They did find out which parts are interchangeable....knuckles, kingpins for OEM C's, hexes, front knuckle.

I just don't see the kingpins for the Alloy knuckles and C's.

Quote:

Originally Posted by Nitro_Geezer_UK (Post 1989344)

SWEET!
Whats the part number for the cvds that Toyofast uses, they would probably last more than 30mins in my rig

Quote:

Originally Posted by constantmotion (Post 1989379)

The ones he bought was TA2243B....it's the same ones listed.

I didn't get CVD's from GPM... they were the aluminum universals. Honestly, I'd pass on them. The weight and use of our CC-01's is totally different than an on-road car, which they are intended. If GPM were to make those universals in steel rather than aluminum, I think they'd have a winner!

I've had better luck with the Yeah Racing CVD's holding up to abuse.

yea i herd those gpm universals break easily on the road drift cars.

hopefully the steer assembly is not just a replacement of original but one with bushings or bearing