ninetwofiveRC's Bronco

[ninetwofiveRC]

might put this in it.. well see



and tires should be here tomorrow!

[pantablo]

that's a nice Bronco! I love the cc-01's.
What "Brentwood" are you in (what state)?

[ninetwofiveRC]

Originally Posted by pantablo

that's a nice Bronco! I love the cc-01's.
What "Brentwood" are you in (what state)?

thanks! it looks better now! ill get some recent pics! and yea me too.

and Brentwood CA. in Nor Cal. not Southern Cali..

[ninetwofiveRC]

new rims and tires! and installed a 55t integy lathe and window tint.. lol better pics soon!

[m1009cucv]

looks good!! i have a mog, hop to finish it later tonight

[ninetwofiveRC]

Originally Posted by m1009cucv

looks good!! i have a mog, hop to finish it later tonight

thanks man.

[gapjr]

Okay, I've got to sell some s#%, I want a CC-01! That Bronco looks great . I just can't understand why the Bronco is $257 (on Tower), Unimog is $185, and the Land Cruiser is $170. What gives? Is the body the only diffeence in those kits? I can see a few dollars difference for different bodies but a $90 difference, WOW .

[gapjr]

Did you try this ezrun setup in it? I was wondering how one of those would do in a CC-01. I've got some ezrun stuff in my fast rc's and those esc's are awesome.

Originally Posted by ninetwofiveRC

might put this in it.. well see



and tires should be here tomorrow!

[ninetwofiveRC]

Originally Posted by gapjr

Okay, I've got to sell some s#%, I want a CC-01! That Bronco looks great . I just can't understand why the Bronco is $257 (on Tower), Unimog is $185, and the Land Cruiser is $170. What gives? Is the body the only diffeence in those kits? I can see a few dollars difference for different bodies but a $90 difference, WOW .

thanks man!
and really? i paid $190 for mine. try rpphobby.com, i think there cheaper there.

[ninetwofiveRC]

Originally Posted by gapjr

Did you try this ezrun setup in it? I was wondering how one of those would do in a CC-01. I've got some ezrun stuff in my fast rc's and those esc's are awesome.

whats ezrun? this is a integy crawler brushless motor and esc.

and no, havent tried it yet.

[Tru3Racing]

Ezrun is what its called.

[gapjr]

It looks like a rebranded Ezrun/hobbywing motor. I can't see the esc to tell if it's a ezrun or not. Ezrun is just a brand name. There are alot of manufacturers selling the motors and esc's just rebranded. I've seen them as turnigy, speed passion, ezrun, tacon, hobbywing and probably more.

[gapjr]

Originally Posted by ninetwofiveRC

thanks man!
and really? i paid $190 for mine. try rpphobby.com, i think there cheaper there.

Just checked. Yep, $190. I always check Tower first because I'm a member of their super saver club so I get emails with coupon codes. When I get ready to order, I'll get them to price match.

[ninetwofiveRC]

Originally Posted by gapjr

It looks like a rebranded Ezrun/hobbywing motor. I can't see the esc to tell if it's a ezrun or not. Ezrun is just a brand name. There are alot of manufacturers selling the motors and esc's just rebranded. I've seen them as turnigy, speed passion, ezrun, tacon, hobbywing and probably more.

oh ok, yea its a integy esc also

[ninetwofiveRC]

Originally Posted by gapjr

Just checked. Yep, $190. I always check Tower first because I'm a member of their super saver club so I get emails with coupon codes. When I get ready to order, I'll get them to price match.

cool! get one!

[ninetwofiveRC]

did a little run with my buddy today.

flexin out the bronco



hopefully gunna start making my rear bumper/swing out tire carrier and get a whip cb atenna!

[Badmuthatrucker]

I've tried one of those eZrun/Hobbywing/... 32 turn crawler combos in a CC.

The gearing is all wrong. It cogged and struggled to lift a wheel onto my foot and was crazy fast. They only have a 380 size core in them, so along with being non sensored, they do a lousy job of dealing with the tall gearing.

If you want to use a GRU they would be fine, but you are better off just using a 55 down to 75 turn motor with the esc switched to brush mode so you can still enjoy the wonders that a hold brake brings to CC01 world. They need one.

[ninetwofiveRC]

Originally Posted by Badmuthatrucker

I've tried one of those eZrun/Hobbywing/... 32 turn crawler combos in a CC.

The gearing is all wrong. It cogged and struggled to lift a wheel onto my foot and was crazy fast. They only have a 380 size core in them, so along with being non sensored, they do a lousy job of dealing with the tall gearing.

If you want to use a GRU they would be fine, but you are better off just using a 55 down to 75 turn motor with the esc switched to brush mode so you can still enjoy the wonders that a hold brake brings to CC01 world. They need one.

oh ok, i ended up going back to my 55t integy. works way better than the 27t

[buddha76]

nice rig just got mine together . was woundering what size tires and wheels u was running and if u went with differnt shocks

[ninetwofiveRC]

Originally Posted by buddha76

nice rig just got mine together . was woundering what size tires and wheels u was running and if u went with differnt shocks

thanks man, just running 1.9 mud slingers and stock shocks.