Super 300s Axial/Berg set

[vodka child]

I've dropped a post into the 'wanted' section as well, but throwing this up to see if anyone knows a site, vendor, private sale etc that has a set of Super 300s for a Berg running Axial knuckles. Tried TCS, Cowrc, CI and not in stock with no ETA for new stock.

Have pinged SDS directly via PM but haven't heard back yet, assuming he is just real busy and not enough time to deal with everything coming in. Any pointers to a place that has these in stock would be great
Cheers
Darren

[Aussie Nerd]

I think if their out of stock at all those places chances are SDS is out of stock too, and waiting on his lightning fast machinist () for the next run. Sorry I can't help any further though.

Good luck
Kieren

[vodka child]

thanks man, its a grasping straws thread more than anything, not holding out too much hope but fingers crossed

hopefully the machinist has had 3 Shredded Wheat and gets a production burst on for the Ti Fighter axles and the Super 300s - Super 300 berg/axial first though
cheers

[travis c.]

Try Hobbytown Concord, 925-685-3802. Or P.M. mann0mann, he is the owner.

[vodka child]

Originally Posted by travis c.

Try Hobbytown Concord, 925-685-3802. Or P.M. mann0mann, he is the owner.

Thanks man, just dropped out a PM, appreciate the suggestion
Cheers,
Darren

[EeePee]

This is totally not in the right forum, but I simply can't figure out where to move it.

[vodka child]

Originally Posted by EeePee

This is totally not in the right forum, but I simply can't figure out where to move it.

was a head scratcher for me, finally settled on here and the 'wanted' section and crossed all digits i'd find something. Glad I wasn't the only one to wonder where the heck to post this thread to

[JeremyH]

Are you swapping to Axial knuckles on your berg and already have berg 300's? If so, then you can just get a set of Axial outers and use your existing inners. If this is what you want to do, then I am sure Eddie at CI can help you.

[vodka child]

Originally Posted by JeremyH

Are you swapping to Axial knuckles on your berg and already have berg 300's? If so, then you can just get a set of Axial outers and use your existing inners. If this is what you want to do, then I am sure Eddie at CI can help you.

Thanks Jeremy, been talking with Eddie at CI as he was putting some foams together along with tyres for me. No dice on what I needed and he'd given SDS a shout to At a no choice push I could use just outers but really need the complete axle assembly

Cheers for the dets though man as always real helpful much appreciated

[EeePee]

Originally Posted by vodka child

was a head scratcher for me

Probably the axle specific forum...

[4VRYNG]

Originally Posted by vodka child

I've dropped a post into the 'wanted' section as well, but throwing this up to see if anyone knows a site, vendor, private sale etc that has a set of Super 300s for a Berg running Axial knuckles. Tried TCS, Cowrc, CI and not in stock with no ETA for new stock.

Have pinged SDS directly via PM but haven't heard back yet, assuming he is just real busy and not enough time to deal with everything coming in. Any pointers to a place that has these in stock would be great
Cheers
Darren

Daves at Rocas Rojo this weekend. FYI

[Nabil]

Last I saw john has a bag of axial outers, but no berg inners. I got the last one at awcc

[vodka child]

Originally Posted by e-hills4x4

Last I saw john has a bag of axial outers, but no berg inners. I got the last one at awcc

ah so you're my eh buying the last one! LOL These things are freakin hard to track down. Hobbytown had a set till Fri so i was day late asking on Sat

Thanks for the all the replies guys, if you hear of anyone in your local club who is looking to sell their Berg innter Axial outer Super 300s have em drop me a PM, these don;t have to be brand new just not beat to hell and in need of a full rebuild.

Hoping the machinist comes good soon on these though, have had anything from weeks to months from sites re their ETA on more stock
Cheers,
Darren

[jeepcj776]

sds told me too buy the berg/berg ones from TCS then Send them to him and he would swap to axial Outers

[vodka child]

Originally Posted by jeepcj776

sds told me too buy the berg/berg ones from TCS then Send them to him and he would swap to axial Outers

Thanks i'll drop out a PM see if that is possible. Sounds like a good idea
Cheers
Darren

[travis c.]

Originally Posted by vodka child

ah so you're my eh buying the last one! LOL These things are freakin hard to track down. Hobbytown had a set till Fri so i was day late asking on Sat

Thanks for the all the replies guys, if you hear of anyone in your local club who is looking to sell their Berg innter Axial outer Super 300s have em drop me a PM, these don;t have to be brand new just not beat to hell and in need of a full rebuild.

Hoping the machinist comes good soon on these though, have had anything from weeks to months from sites re their ETA on more stock
Cheers,
Darren

You must have been given bad info, I was there yesterday, they have Berg/Berg, and Berg/Axial hanging in the cabinet.

[vodka child]

Originally Posted by travis c.

You must have been given bad info, I was there yesterday, they have Berg/Berg, and Berg/Axial hanging in the cabinet.

That's a bugger, was a PM from Mike, guess he must haven't seen the stock. I've ordered Berg/Berg now and John is switching the stubs out for me.