Re: Drill press rim mod's with VP hubs |
Re: Drill press rim mod's with VP hubs I finally got around to do this mod on my losi night crawler plastic rims. Such an awesome mod instead of buying new rims just to be able to use vp hubs, plus I wanted to keep plastic rims for now. What I used for drill bits is first a 4-40 drill bit (from a 4-40 tap/drill set) which fits perfect in the vp hub between threads, but you have to be careful not to hit the threads, definitely should use a drill press for this. Then used a 3/32 to open a little more following a 7/64 which is perfect for a 4-40 bolt to thread into. Just take your time making sure you line up the drill bit into the hole so it all fits in the end. After that 15/32 for center hole so you can use a 7mm deep socket to tighten down the wheel nut. Thats it, super easy, saves you money. Of course you will use up your time, but after you get first one down, rest goes pretty quick. Like to thank Mr. V for posting this and Travis C for showing him. |
Re: Drill press rim mod's with VP hubs Huge thanks to MR.VERTICAL and everyone that posted. "thumbsup""thumbsup" I am not looking to do the VP mod (yet) but the posts and info allowed me to understand how to Narrow my 3.8 40 series wheels and not worry about them exploding. |
Got sent to this thread by a member on here and read all 19 pages! Apparently I either have too much time or its that awesome. I'm goin with that one. Thanks for such a comprehensive thread on this whole thing. Can't wait to do it on both sets of wheels I got! |
Re: Drill press rim mod's with VP hubs Fyi. You can buy cheap slw style hex hubs from china now. http://pages.ebay.com/link/?nav=item...216758&alt=web http://pages.ebay.com/link/?nav=item...556681&alt=web http://pages.ebay.com/link/?nav=item...656532&alt=web Or here is a slightly different option. It removes the hex and just uses the pin. http://pages.ebay.com/link/?nav=item...633299&alt=web |
Re: Drill press rim mod's with VP hubs 2 Attachment(s) If you have a Axial monster truck and wont to run VP knuckles this mods for you.[ATTACH][ATTACH]Attachment 354417 Attachment 354418[/ATTACH][/ATTACH] |
Re: Drill press rim mod's with VP hubs 2 Attachment(s) |
Re: Drill press rim mod's with VP hubs it would be nice if the pictures that actually show how this mod is done weren't blown away by photobucket. |
Re: Drill press rim mod's with VP hubs Quote:
Check out the add ons and see if one works for you http://www.rccrawler.com/forum/chit-...image-fix.html |
Re: Drill press rim mod's with VP hubs that came out amazing! |
All times are GMT -6. The time now is 01:18 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com