| |
03-02-2014, 07:28 AM
| #1 |
| Rock Stacker  Join Date: Jan 2014 Location: Belleville, Ontario, Canada
Posts: 80
|  RC4WD wheel extenders
has anyone tried the RC4WD 12 mm wheel extenders? I'm not sure why but I cannot tighten the bolts without the wheels locking up. I have tried using anywhere from one to all the washers supplied but still no luck. If you leave them "finger tight" , the wheels will turn but we all now the end result. If you tighten them any amount all 4 wheels will lock up. I have tried on SCX10's, TF2, Wraith and a Twin Hammers ( all with diff wheels ) and the result is the same. Any Ideas?
|
|  |
| Sponsored Links | |
| | |
|
03-02-2014, 07:38 AM
| #2 |
| Rock Crawler Join Date: May 2012 Location: Minneapolis
Posts: 858
| Re: RC4WD wheel extenders
I haven't used these. But I've had wheels lock up when tightening. It could be the 12mm hex on the wheel that is the culprit. The stock hexes that come with an axial 1.9 are pretty narrow. The ones that come with a wraith are wider and have a little centering nub. I'd try to get some 12mm hexes for a 2.2 wheel and see if that resolves the issue. Dna |
|
| |
 |
RC4WD wheel extenders - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 12mm hex wheel extenders? | MonScx10 | Axial SCX-10 | 7 | 01-15-2014 06:02 PM |
| Offset Wheel Extenders for SCX10? | alexchen86 | Tires and Wheels | 8 | 08-12-2013 12:55 PM |
| 12 mm wheel extenders | steve708 | Axial AX-10 Scorpion | 1 | 07-26-2010 03:14 PM |
| problem with wheel extenders | kblackwell71 | Losi Mini-Rock Crawler | 11 | 11-26-2008 10:40 PM |
| |
Linear Mode
