RCCrawler Forums

STANG KILLA SS · 10-03-2014, 11:10 AM

The Scale Shop is very proud to release our latest beadlock wheel. Three years in the making this unique wheel is modeled after the 1:1 Hutchison Rock Monster internal beadlock, and is definatly one of the baddest looking wheels on the market. Uses industry standard VP SLW hex hubs for adjustable offsets. Available in raw finish or black.

Internal beadlock design has slight weight savings over traditional beadlocks and fewer screws to assemble.

Specs:
0.75" Internal Ring Width
0.58" Backspacing
1.9 oz Weight with hardware
Mil-Spec Type II Class 2 Anodizing
Made in USA!

Whats Included:
4x Outer Wheels
4x Inner Wheels
4x Inner Rings
65x SS Socket Head Cap Screws
(VP hubs, scale hardware and scale hubs are not included)
(Disclaimer: Proline tires are do-able, but not recommended, message me for more info)

more info here:
~TSS~ 1.9 Rock Monster Internal Beadlocks
.
.
.

STANG KILLA SS · 10-03-2014, 11:12 AM

Quote:

Originally Posted by CarterFab

They are truly stunning in person. We mounted up set #001 last week and have been admiring them since. They basically assembled themselves with our BFG/CI DW foam combo. We installed black shcs, come with stainless. The new take on the 3 piece design is also ingenious, giving plenty of knuckle clearance and good looks.

Assembly is similar to any 3 piece wheel design with the exception of the hardware.

sickcivic95 · 10-03-2014, 04:46 PM

I really like these and would like to know the clearance on the ID of the rear ring? I'm wondering how tight the fight will be if they even go In on a set of VP rotors. I'm sure others would like to know for knuckle weights, sorry if I missed the dims anywhere but I didn't see them in your other thread either.

-Dan

EDIT: cancel that I found on the website duh... Should have looked first.

.75 ID Incase anyone else is wondering.

mjderstine · 10-07-2014, 09:33 AM

hey Cory,

to keep a "standard" offset with the use of SLW hubs, what offset would you recommend? .25? .35? right now i am running stock width scx10 axles with GMADE wheels. any advice you can give would be great.

if you don't give advice i can probably figure it out too ;) was just sitting here at work thinking about putting them together later tonight.

STANG KILLA SS · 10-07-2014, 10:30 AM

i would definatly suggest 225s.

Thanks!

sic1to · 10-07-2014, 10:49 AM

So will 225 hubs clear knuckle weights & vp high steer? I'm at work gettin ready to get busted on company Internet!!!

STANG KILLA SS · 10-07-2014, 12:33 PM

clears VP high steer no problem. even zero ackerman.
VP knuckle weights have a 1.6 OD and should clear with no additional plates. but i do not own knuckle weights to confirm.

sic1to · 10-07-2014, 03:54 PM

Ty sir!!!

WraithVader · 10-10-2014, 08:58 PM

Any chance of this amazing wheel being available in a 2.2?

STANG KILLA SS · 10-11-2014, 06:40 AM

definatly coming

sam63 · 10-11-2014, 09:03 AM

Just when I thought I had all the 1.9 wheels I could ever want, along come these.

Coolest wheels yet

STANG KILLA SS · 10-17-2014, 12:31 PM

Customer pics, thanks Michael!

STANG KILLA SS · 10-20-2014, 12:08 PM

installed pics on our Class 0 JK

braceysdad · 10-28-2014, 06:51 PM

Damn

Bananaclip · 10-28-2014, 07:48 PM

I want

STANG KILLA SS · 11-10-2014, 01:45 PM

STANG KILLA SS · 12-05-2014, 12:14 PM

Customer Pics

Thanks id10t!

Thanks Clay!

STANG KILLA SS · 01-13-2015, 11:53 AM

STANG KILLA SS · 01-21-2015, 10:08 AM

customer pics

w/ TSS 8 lug conversion

STANG KILLA SS · 02-12-2015, 09:56 AM

Customer Pics!
courtesy of Carter Fab and Machine

10-03-2014, 11:10 AM	#1
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	~TSS~ 1.9 Rock Monster Internal Beadlocks The Scale Shop is very proud to release our latest beadlock wheel. Three years in the making this unique wheel is modeled after the 1:1 Hutchison Rock Monster internal beadlock, and is definatly one of the baddest looking wheels on the market. Uses industry standard VP SLW hex hubs for adjustable offsets. Available in raw finish or black. Internal beadlock design has slight weight savings over traditional beadlocks and fewer screws to assemble. Specs: 0.75" Internal Ring Width 0.58" Backspacing 1.9 oz Weight with hardware Mil-Spec Type II Class 2 Anodizing Made in USA! Whats Included: 4x Outer Wheels 4x Inner Wheels 4x Inner Rings 65x SS Socket Head Cap Screws (VP hubs, scale hardware and scale hubs are not included) (Disclaimer: Proline tires are do-able, but not recommended, message me for more info) more info here: ~TSS~ 1.9 Rock Monster Internal Beadlocks . . .

10-03-2014, 04:46 PM	#3
sickcivic95 Rock Crawler Join Date: Apr 2009 Location: NE Ohio Posts: 794	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks I really like these and would like to know the clearance on the ID of the rear ring? I'm wondering how tight the fight will be if they even go In on a set of VP rotors. I'm sure others would like to know for knuckle weights, sorry if I missed the dims anywhere but I didn't see them in your other thread either. -Dan EDIT: cancel that I found on the website duh... Should have looked first. .75 ID Incase anyone else is wondering. Last edited by sickcivic95; 10-03-2014 at 04:56 PM.

10-07-2014, 09:33 AM	#4
mjderstine SuperShafty.com Join Date: Jan 2008 Location: Visalia CA Posts: 2,902	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks hey Cory, to keep a "standard" offset with the use of SLW hubs, what offset would you recommend? .25? .35? right now i am running stock width scx10 axles with GMADE wheels. any advice you can give would be great. if you don't give advice i can probably figure it out too ;) was just sitting here at work thinking about putting them together later tonight.

10-07-2014, 10:30 AM	#5
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks i would definatly suggest 225s. Thanks!

10-07-2014, 10:49 AM	#6
sic1to RCC Addict Join Date: Aug 2012 Location: The Garage!!! Posts: 1,386	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks So will 225 hubs clear knuckle weights & vp high steer? I'm at work gettin ready to get busted on company Internet!!!

10-07-2014, 12:33 PM	#7
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks clears VP high steer no problem. even zero ackerman. VP knuckle weights have a 1.6 OD and should clear with no additional plates. but i do not own knuckle weights to confirm.

10-07-2014, 03:54 PM	#8
sic1to RCC Addict Join Date: Aug 2012 Location: The Garage!!! Posts: 1,386	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Ty sir!!!

10-10-2014, 08:58 PM	#9
WraithVader Pebble Pounder Join Date: Nov 2012 Location: Louisville Posts: 105	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Any chance of this amazing wheel being available in a 2.2?

10-11-2014, 06:40 AM	#10
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks definatly coming

10-11-2014, 09:03 AM	#11
sam63 Rock Crawler Join Date: May 2012 Location: Washougal Posts: 625	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Just when I thought I had all the 1.9 wheels I could ever want, along come these. Coolest wheels yet

10-17-2014, 12:31 PM	#12
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Customer pics, thanks Michael!

10-20-2014, 12:08 PM	#13
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks installed pics on our Class 0 JK

10-28-2014, 06:51 PM	#14
braceysdad Adilynsdad too! Join Date: May 2004 Location: G ville Posts: 8,844	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Damn

10-28-2014, 07:48 PM	#15
Bananaclip I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared. Posts: 3,008	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks I want

11-10-2014, 01:45 PM	#16
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks

Sponsored Links

~TSS~ 1.9 Rock Monster Internal Beadlocks - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
~TSS~ 1.9 Rock Monster Internal Beadlocks	STANG KILLA SS	Vendors Tires and wheels	38	03-31-2016 09:42 AM
Help please! Internal beadlocks	JABO	Tires and Wheels	3	11-26-2013 08:55 AM
TSS Beadlocks with 1.9 Pit Bull Rock Beasts	fluxberkman	Tires and Wheels	2	08-12-2013 09:18 AM
internal 2.2 beadlocks?	Col. Sanders	Tires and Wheels	2	11-10-2009 01:09 PM

12-05-2014, 12:14 PM	#17
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Customer Pics Thanks id10t! Thanks Clay!

01-13-2015, 11:53 AM	#18
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks

01-21-2015, 10:08 AM	#19
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks customer pics w/ TSS 8 lug conversion

02-12-2015, 09:56 AM	#20
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ 1.9 Rock Monster Internal Beadlocks Customer Pics! courtesy of Carter Fab and Machine

RCCrawler Forums

Thread: ~TSS~ 1.9 Rock Monster Internal Beadlocks