Vanquish Scale Hardware... Need Some Measurements

[crawlinwithacat]

Good afternoon. I am working on a design for some beadlock wheels that I am going to mill out on my CNC machine. I am planning on using the scale wheel hardware from Vanquish. If you have either of the following products and a caliper I would love some help. I have looked on the Vanquish website and others and have been unable to find the info I am after.

Vanquish Scale Beadlock Ring Screw Kit:
https://www.amainhobbies.com/vanquis...qet2yq7cqeqctz
These ones I need:
The average head diameter to the thousandth of an inch.
The length of the threads to the nearest millimeter.


Vanquish SLW Hub Scale Screw Kit:
https://www.amainhobbies.com/vanquis...qet2yq7cqqqctz
These I really only need the head diameter to the thousandth of an inch. Though the thread length in millimeters would be helpful too. Thanks in advance!

[crawlinwithacat]

Well since no one has piped up for a couple weeks, I just decided to buy the hardware and measure them myself for the next guy.

Beadlock ring screw kit:
Thread length is 6mm and the head diameter is 0.118"

SLW hub screw kit:
Thread length is also 6mm and the head diameter is 0.170"

Hopefully this helps someone down the road