Re: TRX4 wheel fitment info Quote:
|
Re: TRX4 wheel fitment info Tire upgrade I installed the Mad Beast on the TRX4 and I like them alot. The standard dual stage foams are way to soft for the Defender Body so I used the CI Mad Beast foams and I guess they will work great. If not, I will cut them down a little bit. https://farm5.staticflickr.com/4511/...3057aa1b_c.jpg TRX4 Land Rover Defender 110 RTR Tire vs BFG vs Mad Beast https://farm5.staticflickr.com/4483/...a760a3c1_c.jpg Traxxas Tire vs BFG vs Mad Beast Dual stage vs CI foams https://farm5.staticflickr.com/4467/...757f7c05_c.jpg TRX4 Land Rover Defender 110 https://farm5.staticflickr.com/4460/...b0644230_c.jpg TRX4 Land Rover Defender 110 https://farm5.staticflickr.com/4490/...f8eed6cf_c.jpg TRX4 Land Rover Defender 110 https://farm5.staticflickr.com/4498/...cabf262d_c.jpg TRX4 Land Rover Defender 110 |
Re: TRX4 wheel fitment info Anyone try the RC4WD Rock Creepers 1.9? Love the look, but not sure how they will look as they are pretty short 96.5mm. |
Re: TRX4 wheel fitment info Quote:
https://i.imgur.com/ShKJrgcl.jpg There is also the fact that the X3 soft & sticky compound, despite it's name, is neither soft or sticky. Consider the Proline BFG Krawlers or Hyraxs for a similar tread pattern in a much better performing tire that fits well on the TRX4. |
Re: TRX4 wheel fitment info Are you still running those tires? Have you tried to lower the body at all? |
Re: TRX4 wheel fitment info Quote:
Out of the box, the body is as low as you are going to get it without some cutting. |
Re: TRX4 wheel fitment info Anyone know how these would look and work? RC4WD Mickey Thompson Classic Lock 1.9" Internal Beadlock Wheel Also if they would look ok and work ok, what would be a good all purpose tire? Not looking to do any serious crawling, more of an all terrain. A Little Rock, dirt, mud, hills, I live in a very diverse area lol. |
Re: TRX4 wheel fitment info Quote:
|
Re: TRX4 wheel fitment info Quote:
|
Re: TRX4 wheel fitment info Does anyone know if the SSD portal covers will work with PROLINE flatline or denali wheels? I have the wheels, and want the SSD covers, If not I will buy SSD wheels as well but hoping to spend that cash on something else if possible.."thumbsup" Thanks |
Re: TRX4 wheel fitment info Anyone already tried BoomRacing Krait wheels? Got some Venomous Krait wheels from a project I cancelled, and might throw them on my TRX4 when it gets here |
Re: TRX4 wheel fitment info Thanks! I'll wait with selling them then :) And ofcourse will post some pics here when the TRX4 is here and I mounted them :) |
Re: TRX4 wheel fitment info Just tried the BoomRacing Venomous Krait wheels. They hit the portal cover with the screws that hold them together, possible solved by using a hex screw with a smaller/flatter head instead of the large ones supplied. And I cannot tighten the wheel nuts enough, they hit the end of the thread before the wheel is fully tightened Also the supplied wheel wideners do not fit the TRX output shafts, they need to be drilled out by about 1mm to fit. |
Re: TRX4 wheel fitment info Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk |
Re: TRX4 wheel fitment info Ok. So if I'm taking all this information in properly, all I need to do to make the RC4WD 5 lug White wagon wheels I have fit my trx is drill out the center that fits over the axle and swap the rear pin drive adapter to the hex one.....anything else? I picked up a set of these wheels already from my LHS before i even took into account the differences with these axles and if they would work. I really like the classic white wagon wheel look so I want to make them work. They will be paired with TSL/SX-XL's........ |
Re: TRX4 wheel fitment info Yes that is correct all you need to do is open up center hole and get hex adapters I’m running the black rc4wd wagon wheels on mine Sent from my iPhone using Tapatalk |
Re: TRX4 wheel fitment info Quote:
|
Re: TRX4 wheel fitment info Quote:
https://www.gpmparts.com/traxxas-trx...-90084631.html |
Re: TRX4 wheel fitment info Just finished mounting following config fits perfect (incl. Codyboys Front weights): SSD Rockracer 1.9", 475 SLW, SSD Wheel Hex https://uploads.tapatalk-cdn.com/201...a2c0cf9f8d.jpg used rc4wd pro-line inner rings to make the hyrax fit |
Re: TRX4 wheel fitment info Quote:
Gonna order some right away, seems more reliable than a washer :lmao: |
All times are GMT -6. The time now is 12:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com