Re: Carpetfuzz's VS4-10 PRO Quote:
Looking Fantastic and all but.. Shouldn't that swaybar link be twisted the other way? The way you have it looks like it might limit articulation. |
Re: Carpetfuzz's VS4-10 PRO Quote:
|
Re: Carpetfuzz's VS4-10 PRO Quote:
Unless you don't need/want any rear flex. http://www.rccrawler.com/forum/membe...4439-68675.jpg Maybe it's just me not having a VS4. |
Re: Carpetfuzz's VS4-10 PRO Quote:
|
Re: Carpetfuzz's VS4-10 PRO Quote:
I see what you saw and get why you did what you did. "thumbsup" |
Re: Carpetfuzz's VS4-10 PRO Quote:
Sent from my moto g(7) power using Tapatalk |
Re: Carpetfuzz's VS4-10 PRO Quote:
|
Re: Carpetfuzz's VS4-10 PRO A what brand of bronze/brass ball links that you have on the SSD shocks? My SSD shocks came with chrome ball links and they don’t fit the axle mounts on the VS4-10: Vanquish ball links are shorter. I did swap ball links from the Incisión shocks but they appear to be slightly smaller diameter. (SSD ball links diameter is larger than Incision ones) Any help would be appreciated 😎 |
Re: Carpetfuzz's VS4-10 PRO Quote:
Here’s what I used https://uploads.tapatalk-cdn.com/202...df92a0a1cf.jpg They fit in the SSD rod ends. All I did to get them to fit in the VP axles was file down the sides a little bit on each side till they slipped into place. If you have any more questions please ask away. Sent from my iPhone using Tapatalk |
Re: Carpetfuzz's VS4-10 PRO Hey Mark. After you sent me the pictures and videos I had to come check out your build thread. I really like how this turned out. the d44's are a great touch. |
Re: Carpetfuzz's VS4-10 PRO Quote:
Hey thanks buddy. It is really a great truck. Stay tuned I have a couple updates to it that I haven’t posted up yet. |
Re: Carpetfuzz's VS4-10 PRO Quote:
|
Re: Carpetfuzz's VS4-10 PRO Quote:
|
All times are GMT -6. The time now is 10:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com