07-09-2023, 08:57 AM | #1 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Twade’s VS410 Mash-up
First thread in a while, I figured with how slow the forum has been, I might as well contribute something. This is a pretty basic build… well, assembly. [mention]txbart [/mention] listed an assembled but all brand new VS410 Pro based project for sale at an incredible price, so I knew I had to jump on it. And even though I didn’t have a plan in mind at the time, it didn’t take long once the rig showed up. This was built to a really good standard, and while it may seem like a step backwards, I already have a really nice pro with clear d44 housings. Ever since the f10 portals were released, I’ve had the idea of putting together my ideal version of a VS410 Ultra. I had an ultra for a short period, but found the f9 portals to lack in steering angle, and be a little too heavy for my liking. So step one was tear down and sell the parts I wasn’t going to use. After all was said and done I was basically left with Origin body Vs410 chassis Reefs 422hd v2 servo VP clamping servo horn Holmes Crawlmaster sport 16t (donated from a past project) I had already sold the pro transmission before deciding to make this a project. But I found a good deal on a used kit/ultra spec vfd and got that coming asap Then once my PayPal account recovered, I scored a deal on a Phoenix portal kit, and some falken mt’s from [mention]JSterrett [/mention] Sorted through what I did and didn’t want from the kit, and ended up with Axles Links Driveshafts 80mm s8e shocks (not pictured) And that’s where I’m currently at. Next steps for me are assembling the axles, links and shocks, replacing bearings in the vfd, and then deciding on a wheel and tire package. Tire wise, I’m either using some Pitbull rock beasts, or falken mt’s. Wheels will be vanquish of some sort, possibly grey tanks(from another rig), or some sort of 310, 101, or machete. I also need to grab an Esc, I’ll most likely go with a Hobbywing 1080 to keep this thing low budget/reliable. No Last edited by twade984; 07-09-2023 at 12:33 PM. |
Sponsored Links | |
07-09-2023, 09:41 AM | #2 |
RCC Addict Join Date: Mar 2019 Location: Hemet
Posts: 1,214
| Re: Twade’s VS410 Mash-up
Heck yea! Can’t wait to see this thing come together Sent from my iPhone using Tapatalk |
07-09-2023, 10:29 AM | #3 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,289
| Re: Twade’s VS410 Mash-up
If this is a budget build I can't wait to see the no budget build lol
|
07-09-2023, 11:33 AM | #4 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up Quote:
Me either! Sent from my iPhone using Tapatalk | |
07-09-2023, 12:16 PM | #5 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Twade’s VS410 Mash-up
Looks like a fun build. I’ll be watching this mashup take shape! Yeah, Lord knows RCC needs more traffic. It’s been feeling like a ghost town around here lately! Sent from my iPhone using Tapatalk |
07-09-2023, 12:25 PM | #6 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up Quote:
I agree, seems to be only a hand full of people posting regular build threads. Thanks for checking it out Sent from my iPhone using Tapatalk | |
07-09-2023, 12:30 PM | #7 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up
Got a little work done during nap time Trans torn down, cleaned, new bearings and fresh grease. It was in pretty good shape, and well greased, probably could have ran it with no issues for a while, but this is part of the fun. Got the motor/trans assembly dropped in, and servo horn centered and servo installed. For my future reference, I’m sticking with the 56/15 spur/pinion combo. If it’s too slow, I’ll grab a 52t spur and swap out. Sent from my iPhone using Tapatalk |
07-09-2023, 07:39 PM | #8 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Twade’s VS410 Mash-up
More progress made! Axles, links and driveshafts all built and installed on the chassis For future reference, I used 70 weight in the shocks Auditioned the wheels and tires off another rig, think I’m sold on the clear machetes, but tires are a tad small. Tanks look good, but not sold on the grey. Think machetes and falkens are a winner. I will need to get some new foams to properly fill out the tires Sent from my iPhone using Tapatalk Last edited by twade984; 07-09-2023 at 07:45 PM. |
07-10-2023, 06:12 AM | #9 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Twade’s VS410 Mash-up
The Falken's and the Machete's are perfect! |
07-10-2023, 12:08 PM | #10 |
RCC Addict Join Date: Mar 2019 Location: Hemet
Posts: 1,214
| Re: Twade’s VS410 Mash-up |
07-10-2023, 12:21 PM | #11 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up Quote:
I have a hard time imagining a setup I’d like more Foams and 52t spur gear are on the way from Eh main! Hope to run this thing by the weekend Sent from my iPhone using Tapatalk | |
07-13-2023, 08:30 AM | #12 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up
Well I got a window of opportunity to take some rigs out after work today. Foams showed up yesterday, so last night I stuffed those in the falkens, stole a 1080 that was slated for another project, realized I ran out of receivers on my last project, and then stole one out of another rig. And she’s ready to go. Wiring could be better, but it will do for now. Sent from my iPhone using Tapatalk |
07-13-2023, 09:32 AM | #13 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Twade’s VS410 Mash-up
Man them close-up pics look even sexier!! |
07-13-2023, 10:00 AM | #14 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up For a last minute impulse project, this turned out really good. I only wish I could start every project with a painted body I should mention I went with CI lil nova 4.5” med/firm foams. Removed the outer tuning ring, and they seem to be perfect for this setup Sent from my iPhone using Tapatalk |
07-13-2023, 01:55 PM | #15 |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,801
| Re: Twade’s VS410 Mash-up
It looks almost to good to go scuff up. Im goina throw a rig together right quick, before i go get my daughter saturday. So stoked shes comin down to spend a week with me. She wants to go tiny truckin while shes here
|
07-13-2023, 09:33 PM | #16 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up Quote:
Almost, but not quite! What kind of rig you slapping together? Sent from my iPhone using Tapatalk | |
07-13-2023, 09:39 PM | #17 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up
Got this thing out for its first run, overall I’m super happy with it. Performs as well as you’d expect, the vs410 platform is pretty dialed in imo. Future changes will definitely include a 52t spur, and I’m probably going to pull the 16t Crawlmaster and put in a 13t. 16t just didn’t feel smooth enough. I have 13’s in multiple rigs geared much higher that feel a lot better. Otherwise this thing is basically done. Eventually I’ll add some scale hubs, and maybe scale hardware for the wheels. Sent from my iPhone using Tapatalk |
07-14-2023, 07:11 AM | #18 | |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Twade’s VS410 Mash-up Quote:
Nice shots of it out on the rocks! Looks right at home! That's great! Sounds like good quality time is going to be had wheelin' some tiny trucks! | |
07-14-2023, 03:19 PM | #19 |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,801
| Re: Twade’s VS410 Mash-up
I agree with brian, she looks right at home. Did u make that side hill, or did u roll off the edge? Lol Ive got a vs4/10.2 im goina throw a radio in. Ive got it traded to a buddy, next time i see him. Til then, Ky can drive it. Most definantly brian. Have got to see her much since i moved to bama almost 8 yr ago. So im pretty excited for her to come down |
07-14-2023, 04:08 PM | #20 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: Twade’s VS410 Mash-up Quote:
It made it about an inch further and then I turned the wheels the wrong way and over she went I couldn’t believe it held on as long as it did though Sent from my iPhone using Tapatalk | |
Twade’s VS410 Mash-up - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mish mash | Old n ratty | 1.9 Scale Rigs | 5 | 05-29-2017 09:07 AM |
Bangers and Mash | blue10 | Tamiya Clod Buster | 8 | 01-10-2007 12:26 PM |
Monster Mash | 1BadJeepBruiser | Chit Chat | 20 | 03-15-2006 07:47 AM |
| |