| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
08-20-2010, 07:51 AM
| #1 |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
|  Cruzin Illusion's MOA Motor Skids Cruzin Illusion's MOA Motor Skids  I was sick of watching my $60 a piece handwound motors get beat on the rocks. So I came up with a nice motor skid made out of nylon so they will slide over the rocks. In the past I have made a few of these motor skids for MOA crawlers. Due to the number of requests I will start making the motor skids available to the public. This will come in a generic size and will need to be trimmed to fit your particular application, since everyone runs a different set up. I am selling the motor skids for $5.00 a piece plus shipping. I ship USPS Priority Mail with Delivery Confirmation. Shipping usually will cost $6.00 in the USA. I can ship up to ten for that price. These should be in production by the end of next week. I will take pre-orders for the first 50. ***You can PM me with any questions or if you would like to place a pre-order.*** The material diameter is smaller than the motor diameter. This helps hold the skid in place. From there it was just snapping them over the motors. I did put a small piece of servo tape on one spot to prevent them from rotating when they drug across the rocks. It is definately a great upgrade/mod for your $60 a piece motors. I made sure on the lower section that the skid covered the tabs and the brush wire to prevent them from being cut.   Front Motor:    Rear Motor:     Last edited by Cruzin Illusion; 08-20-2010 at 08:22 AM. |
|  |
| Sponsored Links | |
| | |
|
08-20-2010, 08:20 AM
| #2 |
| I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
|
What type of material are they?
|
|
| |
|
08-20-2010, 08:21 AM
| #3 | |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
| |
|
| |
|
08-20-2010, 08:24 AM
| #4 | |
| I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
| Quote:
Cool. Can you get them to be thinner for maximum ground clearance? | |
|
| |
|
08-20-2010, 08:32 AM
| #5 | |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
The wall thickness is at 0.0625. That does not take up much ground clearance. | |
|
| |
|
08-20-2010, 08:59 AM
| #6 | |
| I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
| Quote:
True, but I am just used to running a super thin skid. Yours look nice  | |
|
| |
|
08-20-2010, 10:00 AM
| #7 |
| I wanna be Dave Join Date: Jul 2008 Location: appleton
Posts: 2,067
|
i need 10 thanks Tom
|
|
| |
|
08-20-2010, 10:09 AM
| #8 | |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
Done. | |
|
| |
|
08-20-2010, 10:18 AM
| #9 |
| Rock Crawler Join Date: Sep 2008 Location: Utah
Posts: 691
|
Ill be in for a set!
|
|
| |
|
08-20-2010, 10:22 AM
| #10 | |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
You have a PM. | |
|
| |
|
08-20-2010, 10:25 AM
| #11 |
| I wanna be Dave Join Date: Jul 2008 Location: appleton
Posts: 2,067
|
payment sent
|
|
| |
|
08-20-2010, 10:43 AM
| #12 |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
|
22 skids left for the pre order.
|
|
| |
|
08-20-2010, 11:56 AM
| #13 | |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
| |
|
| |
|
08-23-2010, 03:56 AM
| #14 |
| Pebble Pounder  Join Date: Sep 2005 Location: Columbus
Posts: 154
|
I would be up for 2 sets.
|
|
| |
|
08-23-2010, 04:40 AM
| #15 |
| Rock Crawler Join Date: Aug 2008 Location: Strugglin
Posts: 963
|
I'll take 3 set's. Thanks
|
|
| |
|
08-23-2010, 09:30 AM
| #16 | ||
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
| Quote:
Quote:
Thank you!!! | ||
|
| |
|
08-23-2010, 09:45 AM
| #17 |
| Pebble Pounder Join Date: Jul 2008 Location: Kansas City
Posts: 162
|
I would like to buy a set if you still have any.
|
|
| |
|
08-23-2010, 12:44 PM
| #18 |
| Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City
Posts: 797
|
All PM's returned. There are 14 left on the pre order. I have additional material ordered so all orders above the pre orders should go out soon after. Thanks, Tom |
|
| |
|
08-23-2010, 09:54 PM
| #19 |
| Like a boss...   Join Date: Feb 2008 Location: NorCal
Posts: 1,008
|
I'll buy 6 for the store.
|
|
| |
|
08-24-2010, 12:54 AM
| #20 |
| Rock Crawler Join Date: Sep 2006 Location: The Nation of Aiea....
Posts: 533
|
I need a set........! |
|
| |
|
| |
Linear Mode
