RCCrawler Forums

goobs · 04-12-2011, 08:52 PM

can you do powder coating or anodizing?

motoworx · 04-12-2011, 09:00 PM

I could out source it but if you are not doing large quantities it doesn't make much sense from a cost standpoint.

goobs · 04-13-2011, 10:25 AM

Quote:

Originally Posted by motoworx

I could out source it but if you are not doing large quantities it doesn't make much sense from a cost standpoint.

ok thanks i was just wondering.

Gimp · 04-14-2011, 04:11 PM

Just got mine today. AMAZING quality

Gimp · 04-14-2011, 07:04 PM

intheworks · 05-23-2011, 10:45 AM

Just ordered a set of the 8 spokes. Really like the design. They look like a strong wheel

TSK · 07-14-2011, 10:13 PM

My freshly re-built sportsman was in need of some new hoops. I wanted something that was beefy and oozed style. The Motoworx concave 5 spokes were too good a deal to pass up.

Boy am I pleased thatI got them. The quality is spectacular. And this has go to be the first concave faced billet wheels I have ever seen for an rc. They were super easy to mount, and have just the right amount of mass. No need for wheel weight in the rears

They even have pre-drilled breathers.

If you are looking for a reasonably priced, high quality wheel, look no further. You will not be disappointed.

tazman · 08-25-2011, 07:40 PM

Just got my 2.2 8 hole slant face rims today. Just amazing looking rims! I will be ordering some 1.9 rims in the near future. Great vendor and thanks for the quality products that you make.

mayheem · 09-07-2011, 09:05 PM

these are great looking wheels. i have a ax10 if i put these on will it be same width? think i will be ordering these soon just not sure which ones to get.

motoworx · 09-08-2011, 08:53 PM

Quote:

Originally Posted by mayheem

these are great looking wheels. i have a ax10 if i put these on will it be same width? think i will be ordering these soon just not sure which ones to get.

Take your axle length hex face to hex face and add 1.850" and this will be your overall width.
Thanks
Jake

buggy · 09-10-2011, 12:20 AM

nappahdog · 09-19-2011, 10:37 PM

you make some great looking wheels

what do you have for a super narrow 1.9? 8 spoke is awesome but not enough offset for me from the looks of the pic.

the mrc pro needs super narrow high offset wheels to clear the servo mount.

thanks.

motoworx · 09-20-2011, 06:33 AM

Quote:

Originally Posted by nappahdog

you make some great looking wheels

what do you have for a super narrow 1.9? 8 spoke is awesome but not enough offset for me from the looks of the pic.

the mrc pro needs super narrow high offset wheels to clear the servo mount.

thanks.

I can make whatever you want if you got the $$$$. My standard 1.9's are .9 thick and have .275" of back spacing. Email me at jake@motoworxracing if you want a drawing.
Thanks
jake
www.motoworxracing.com

strap624 · 09-25-2011, 03:42 PM

Just ordered a set of the 8 hole slant face for the wraith!

strap624 · 10-03-2011, 04:46 PM

Thanks!

troutbum · 10-04-2011, 12:40 AM

Just ordered some of the Maltese wheels for my Wraith. BAD ASS!! Hoping they'll have no problem clearing the steering upgrades!?

clayton78 · 10-05-2011, 07:51 PM

Cant beat the Price! I love the looks of mine!

meatmonkey · 10-13-2011, 07:35 PM

awesome looking, truly heavy duty, with a precision fit. What more could you ask for in a wheel?

Bump for a solid product and vendor.

motoworx · 10-14-2011, 05:21 PM

Quote:

Originally Posted by meatmonkey

awesome looking, truly heavy duty, with a precision fit. What more could you ask for in a wheel?

Bump for a solid product and vendor.

Thanks to all who submitted the pictures. They look great.

AaronJ · 10-21-2011, 02:28 PM

Is anyone running these wheels on a wraith with vanquish knuckles? I would like to order a set but want to be sure I won't have any interference issues first. Also do they hold RC4WD tires well? I have heard some have trouble with their beads not staying put.

07-14-2011, 10:13 PM	#67
TSK Shelf queen Join Date: Aug 2008 Location: Internet Posts: 5,857	New hoops for my sportsman My freshly re-built sportsman was in need of some new hoops. I wanted something that was beefy and oozed style. The Motoworx concave 5 spokes were too good a deal to pass up. Boy am I pleased thatI got them. The quality is spectacular. And this has go to be the first concave faced billet wheels I have ever seen for an rc. They were super easy to mount, and have just the right amount of mass. No need for wheel weight in the rears They even have pre-drilled breathers. If you are looking for a reasonably priced, high quality wheel, look no further. You will not be disappointed.

04-12-2011, 08:52 PM	#61
goobs RCC Addict Join Date: May 2007 Location: pasadena, tx Posts: 1,108	can you do powder coating or anodizing?

04-12-2011, 09:00 PM	#62
motoworx Quarry Creeper Join Date: Jun 2009 Location: Canon City Posts: 212	I could out source it but if you are not doing large quantities it doesn't make much sense from a cost standpoint.

04-14-2011, 04:11 PM	#64
Gimp RCC Addict Join Date: Oct 2008 Location: PA Posts: 1,594	Just got mine today. AMAZING quality

04-14-2011, 07:04 PM	#65
Gimp RCC Addict Join Date: Oct 2008 Location: PA Posts: 1,594

05-23-2011, 10:45 AM	#66
intheworks Quarry Creeper Join Date: Mar 2007 Location: winchester Posts: 226	Just ordered a set of the 8 spokes. Really like the design. They look like a strong wheel

08-25-2011, 07:40 PM	#68
tazman Quarry Creeper Join Date: Mar 2011 Location: Kailua Posts: 387	Just got my 2.2 8 hole slant face rims today. Just amazing looking rims! I will be ordering some 1.9 rims in the near future. Great vendor and thanks for the quality products that you make.

09-07-2011, 09:05 PM	#69
mayheem Rock Stacker Join Date: Aug 2011 Location: murrieta Posts: 50	these are great looking wheels. i have a ax10 if i put these on will it be same width? think i will be ordering these soon just not sure which ones to get.

09-10-2011, 12:20 AM	#71
buggy RCC Addict Join Date: May 2009 Location: NHFF world headquarters, working on the "rock mauling hill shooting NHFF pig squealing death rocket" Posts: 1,134

09-19-2011, 10:37 PM	#72
nappahdog Rock Crawler Join Date: Apr 2007 Location: presKit Posts: 690	you make some great looking wheels what do you have for a super narrow 1.9? 8 spoke is awesome but not enough offset for me from the looks of the pic. the mrc pro needs super narrow high offset wheels to clear the servo mount. thanks.

09-25-2011, 03:42 PM	#74
strap624 Pebble Pounder Join Date: Aug 2011 Location: phoenix (Ahwatukee) Posts: 193	Just ordered a set of the 8 hole slant face for the wraith!

Sponsored Links

10-03-2011, 04:46 PM	#75
strap624 Pebble Pounder Join Date: Aug 2011 Location: phoenix (Ahwatukee) Posts: 193	Thanks!

10-04-2011, 12:40 AM	#76
troutbum Pebble Pounder Join Date: Sep 2011 Location: Western Colorado Posts: 108	Just ordered some of the Maltese wheels for my Wraith. BAD ASS!! Hoping they'll have no problem clearing the steering upgrades!?

10-05-2011, 07:51 PM	#77
clayton78 Quarry Creeper Join Date: Feb 2008 Location: Bay City Posts: 340	Cant beat the Price! I love the looks of mine!

10-13-2011, 07:35 PM	#78
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	awesome looking, truly heavy duty, with a precision fit. What more could you ask for in a wheel? Bump for a solid product and vendor.

10-21-2011, 02:28 PM	#80
AaronJ Newbie Join Date: May 2011 Location: Mt. Vernon Posts: 38	Is anyone running these wheels on a wraith with vanquish knuckles? I would like to order a set but want to be sure I won't have any interference issues first. Also do they hold RC4WD tires well? I have heard some have trouble with their beads not staying put.

RCCrawler Forums

Thread: Motoworx Racing 2.2 Rock Crawling RC Wheels