Got my set of Shifts on Saturday. Started messing around with them last night. So far I'm liking them. I was setting them up with some VP SLW v1 wheels. Using the Shifts instead of the SLW hubs. Everything installed nice and smooth. The spacers are just the right diameter that they don't stick out between the spokes. Unlike my homemade spacers.

Though I will admit I will not be using the Shifts with these wheels rather I will be using these to build some dually wheels for a build later this spring. They fit great but the pin mount functionality will serve me better in my next project.

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Damn, talk about fast service!! I sent payment for a few sets of these on Wednesday evening and they were in my mailbox on Saturday. Nice work BC-Brian! "thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Well, it looks like I was only partially correct with this statement. It didn't occur to me that the largest OD on these will be closer to the hex pin than a regular SLW. That being said, it looks like these will only work with the outer (tapped) Nordic/RCBros weight. The non-tapped weights are too small in diameter for this hub to clear.

Jeremy,
Do you have any of the weights I sell yet? They may or may not clear still just curious as mine are slightly different. I was planning on getting these once he has something the will be close to a 225 hub

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Nope, mine are from Tomy directly....before you started making them.

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

I have both of the NCD weight systems (Tomi) made and the new RCBro ones...what measurements you guys need?

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Also Curious,

Jeremy, can you get a picture. I didn't have a set of these wheel weights to design around, but If there are changes I can make to improve the design for the next batch I would certainly do so.

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Sure, I will snap one this evening.

I think just making the OD slightly smaller would do the trick..."thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

money sent for a set....;-)

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Cool, keep me posted. Getting the OD slightly smaller may be challenging since I cannot adjust the bolt pattern, but lets see what we can do.

Thanks bquin, got it. Will get them shipped for ya.

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Placed my order yesterday! Cool product. "thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

got mine today top notch product shipping was fast and great communication, I will be buying more!!!

Got mine today, look pretty good. I will get them mounted up on the wraith and the twin hammers for this weekends trail runs.


Sent from my iPhone using misspellings due to fat fingers

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Brian,

this isn't the best picture, but you can see here how the outer (tapped) weights have a slightly larger OD than the inner (untapped) weights:
http://i171.photobucket.com/albums/u...pscb1f896c.jpg

These are the original NCD weights, and it sounds like RCBros is making them a bit different these days, so your hubs might work with his...

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Here is an RcBros weight

this one has 2 tapped holes and 2 holes

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

The outside Diameter of the Shift Hubs is .87". Should be plenty of clearance for those rings. "thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Looks good! Damn Chuck, that's a fancy ruler! "thumbsup"

Will is sending me some of his half rings to test them out with these hubs as well...

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

Let me know how it works out for ya. Waiting to see the fit to pull the trigger on these hubs as well as the RCBros brass rings.;-)"thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

The trigger has been pulled. Can't wait to try these out. Thanks Jeremy for the pics. "thumbsup"

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 

No problem Bryce.

And to show everyone else, these hubs will work just fine with the RCBros weights:
http://i171.photobucket.com/albums/u...ps354c9acc.jpg

Thanks again Will for sending me these to verify that they fit the hubs! "thumbsup"