|
| LinkBack | Thread Tools | Display Modes |
04-07-2009, 09:14 PM | #1 |
Rock Stacker Join Date: Jan 2009 Location: In My Car- hehe
Posts: 61
| 'clicking' in the driveline HELP
i have clicking that occures when i move from forward to reverse and vice versa.... i think ive narrowed it down to the vcd?s in the driveshafts... any one notice this... i saw where legion blew apart the front diff... but the clicking happens no matter where in the gear that the axels sit |
Sponsored Links | |
04-07-2009, 09:20 PM | #2 |
Quarry Creeper Join Date: Feb 2009 Location: Tucson, AZ
Posts: 453
|
The only way you will really be able to tell is to take it apart and look at it. Hope its not something to bad.
|
04-07-2009, 09:27 PM | #3 |
Quarry Creeper Join Date: Feb 2009 Location: In The BackYard Crawlin
Posts: 278
|
how old is the rig?have you gone over everything making sure all the set screws are tight?
|
04-07-2009, 10:02 PM | #4 |
Newbie Join Date: Feb 2009 Location: jerseyville
Posts: 19
| set
the set screws in the drive shafts move,,,,,,check the c-hub pins first,,,,,,if they are too far off center they hit,
|
04-08-2009, 09:23 AM | #5 |
Rock Stacker Join Date: Jan 2009 Location: In My Car- hehe
Posts: 61
|
yea everything is locktited... i might have to take apart the tranny and check the spur gear screws o and its about 4 weeks old with about 5 intense crawling sessions on it |
04-08-2009, 01:17 PM | #6 |
Quarry Creeper Join Date: Feb 2009 Location: In The BackYard Crawlin
Posts: 278
|
cant you just take your drivelines out and check it that way.or does it only make the noise loaded.
|
| |