| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
02-07-2005, 02:21 PM
| #1 |
| Newbie Join Date: Oct 2004
Posts: 42
|  stock thread type on XF2 links Anyone know the thread type for the stock links/ballends? 8/32? 10-24? |
|  |
| Sponsored Links | |
| | |
|
02-07-2005, 06:32 PM
| #2 |
| Newbie Join Date: Jan 2005 Location: hudson
Posts: 4
| I just made longer one!!!!!!! the thread is a m4+.7tap use a #30drill |
|
| |
|
02-22-2005, 10:30 AM
| #3 |
| Newbie Join Date: Oct 2004
Posts: 42
|  Conversion I am trying to make my own links with some carbon fiber arrows. However the ends I have are 8/32 thread. So the question is to either Tap the ball ends with 8/32 or maybe do a conversion rod with one end m4-.7 and other end 8/32? Any suggestions as to the rod thickness to use maybe 1/8? unfortunately I am not near my setup or I would measure for myself. I was hopeing to get the info so I could do a hardware stop on the way home.  |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
