2.2 zero offset. Go wide!!

[motoworx]

Made these with zero backspacing for a customer who runs portal hubs and decided to offer it here on RCC. I can make these in any of my slant face designs. (see www.motoworxracing.com or previous posts for other designs)

Details:
2.2 wheels
12mm hex
overall width is 1.4"
Wheel width is 1.2"
Hex depth is .200"
How wide will your crawler be? add 2.4" to your overall axle lenghth hex to hex.
Not sure of the weight yet but it will be in excess of 6oz

 

[rockhopperz]

how much?? PM!!

 

[jeep94xj]

Any pics mounted?

 

[Drexcl]

how much?? PM!!

X2. Pm please

 

[sally1800]

X2. Pm please

x3 these are sweet

 

[Pappy]

The site is showing $125, but that is $45 more than the standard wheels? Not sure if that is correct....:shock:

 

[motoworx]

zero offsett wheels

These are $125.00. They are more than my other wheels due to the fact that they are not mass produced and they take more material and time to machine.

 

[monkeyracer]

These aren't Zero offset.

Zero offset means the face of the hex is at the centerline of the wheel, these are .6" negative offset (the face of the hex is .6" toward the inside of the wheel.)

FYI

 

[Pappy]

These aren't Zero offset.

Zero offset means the face of the hex is at the centerline of the wheel, these are .6" negative offset (the face of the hex is .6" toward the inside of the wheel.)

FYI

You are correct sir!"thumbsup" Great observation. These are very nice wheels, but I can't justify the extra cost just to get a little wider.

 

[motoworx]

These aren't Zero offset.

Zero offset means the face of the hex is at the centerline of the wheel, these are .6" negative offset (the face of the hex is .6" toward the inside of the wheel.)

FYI

Oops. actually I meant zero backspacing. Sorry

 

[monkeyracer]

The pictures make it obvious what these are, so I figured it wasn't too big of a deal.

 

[activethunderrc]

i'd be down for a set - but the extra cost just doesent justify - if you decide to do at the reg. price pm me i'm in

 

[BrianB]

id be in for a set at reg price too!

 

[jxtreem]

40 series?

Any chance these could be made in a narrow 40 series, with 23mm hex?