wiring diagram for crawler with winch,led, and more

[discgolferlee]

so getting ready to wire up my scx10 build. below is a diagram i have drawn up. any feedback appreciated. I know my bec isn't running servo because br-xl should be able to handle it. I am no noob but figured I would post up this for opinions and thought it may help someone else out as well

 

[heyok]

Nicely done! Lots of good info there and you have shown it very clearly.

 

[discgolferlee]

Nicely done! Lots of good info there and you have shown it very clearly.

thanks!"thumbsup"
do you think the 3racing winch will run fine at 7.2 volts. I have read SOOO many threads and responses with different answers on what people are running as far as voltage through these things

 

[heyok]

Sorry, I don't know. When I run them from the controller I make, they run at the receiver voltage.

 

[WIDELOAD]

Yeah the winch & stock controller will run fine on 7.2v.
3r recommend max 2s lipo input which is 8.4v max, 7.4 nominal so no issues at all.

 

[discgolferlee]

sooo should I bump it to 8.4v to winch

 

[skid plate]

The max voltage the winch will run with life to it would be 9.0 volts.

I have seen them run on 3s lipo voltage straight and last awhile, but you could set your bec to 9.0 and be good to go.



Nice diagram.




JC
8)

 

[Scattman]

I run my 3R winch at 9 volts and it works great. "thumbsup"

 

[JohnRobHolmes]

Lookin good to me. Maybe add it to the other wiring thread we have going? http://www.rccrawler.com/forum/showthread.php?t=116914&highlight=definitive+wiring&page=7

 

[discgolferlee]

I run my 3R winch at 9 volts and it works great. "thumbsup"

9 volts hmmmm sounds beefy.... may have to try that out.

 

[seabeejeep]

I am still a newb, and this was an awesome diagram! BTW I'm proud to be a newb, at least I'm crawling! Thanks for the info, now just waiting for my winch and bec to show up, then it's wiring time."thumbsup"

 

[monsterman]

Sweet this will come in handy as soon as my Winch arrives "thumbsup"

 

[discgolferlee]

glad it is helping someone out