• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Hurricane Hills Crawler Park

Well I broke a lcc wheel pin in my yard in the grass lol. Got some chromo on the way. And I've been eyeballing the summit trans mount for my scx10. Less than 100 bux for crazy wheel speed and crawling. Damn decent.


I'm going after 20 or so pallets on Thursday and I found about 6 cinderblocks here.

I'm thinking rock course on ground level and crazy awesome trials course over that.

Grind the lip on the back of the hex hubs flat. It fixes the bind when tightening the wheel nuts all the way up and can help keep from bending and breaking pins. I want a summit trans and one of Jason's mounts for my SCX in a bad way.

I'm chomping at the bit to get this on some rocks. We still planning on doing work this weekend?
12979672.jpg
 
Grind the lip on the back of the hex hubs flat. It fixes the bind when tightening the wheel nuts all the way up and can help keep from bending and breaking pins. I want a summit trans and one of Jason's mounts for my SCX in a bad way.

I'm chomping at the bit to get this on some rocks. We still planning on doing work this weekend?
12979672.jpg



Yes were doing work both days still. At least while the batteries are charging lol.

I broke down and bought a 4pl from WV hobbies. Chuck hooked me up big time. Got the dig setup on the lcc and tidies up all the wires. Just need to find a good place for the switch now and fix the wheel pin when the d lux pins come in.

I'm gonna bust my ass on wed and Thursday and get the garage ready for us. Not much left but enough. Ive been running the scx10 around and have some sweet lines for a ttc course. Just need a few rakes and were set.
 
Yes were doing work both days still. At least while the batteries are charging lol.

I broke down and bought a 4pl from WV hobbies. Chuck hooked me up big time. Got the dig setup on the lcc and tidies up all the wires. Just need to find a good place for the switch now and fix the wheel pin when the d lux pins come in.

I'm gonna bust my ass on wed and Thursday and get the garage ready for us. Not much left but enough. Ive been running the scx10 around and have some sweet lines for a ttc course. Just need a few rakes and were set.

cody, hit me up with your number. mines 304 395 1210.

we need to figure what time to get started. are you off work early enuff where we could maybe hual a load of rock friday eve? im off at 330 in so charleston, and could grab the trailor and meet ya where ever by 4-415.

and then i know aaron and myself are in for sat for sure.
 
I'm at six one oh five six eleven. (to avoid spam)

Friday I should be home by 2:30 or so. Gotta work in Parkersburg in the am then home. Hit me me up and we grab some.
 
I may be able to help you unload some rock on Friday if you need my help, and I should be able to help on Saturday as well. What time are you going to get started on Saturday?
 
I may be able to help you unload some rock on Friday if you need my help, and I should be able to help on Saturday as well. What time are you going to get started on Saturday?


im sure we can deff use some help unloading friday, as well as sat, plus laying out pallets, and course design.




cody, aaron had a pretty good idea. either laying down some plywood, with a shallow boxed in edges, or a tarp or something to be able to have some actual dirt included in the course.
 
Sure that works for me also. I have plenty of tarps we can use.

I don't care where we go. Yall choose. I'll give 50 for the rock. And see how far thar gets us. We should probably lay out elevated part before we place too much rock so we don't have to move it again. How cool would it be to include a waterfall too. Need a pond pump
 
7 pages and one effin' pic of a bj rig ? c'mon now! (that is a rather tits looking LCC, even if it is an LCC)

i sold my berg parts and bought another sorted 1.9 rig.. theyre just too damned fun.


PICS PICS PICS PICS PICS! (insert popcorn eating smiley here) :flipoff:
 
7 pages and one effin' pic of a bj rig ? c'mon now! (that is a rather tits looking LCC, even if it is an LCC)

i sold my berg parts and bought another sorted 1.9 rig.. theyre just too damned fun.


PICS PICS PICS PICS PICS! (insert popcorn eating smiley here) :flipoff:


new WV TTC champ!!

aaron4.jpg

aaron2.jpg

aaron1.jpg

aaron3.jpg
 
Hurricane Hills Build Days!!

Ok everyone the time is almost upon us. Feb 5 and 6 we are going to have our first build day. Beane and I are going on friday evening to get a load of rock and i figure we will go again on Sat Morning before everyone gets to me house.

Here is the tentative Schedule:

Thursday Evening:
Who: Cody(Captainsafety) and whoever wants to come help
What: getting ~20 pallets from the flea market
When: dunno sometime thursday evening

Friday evening:
Who: Beane and Cody,moparguy
What: first load of rock from shamblin stone in dunbar then unloading in hurricane
When: Beane lets meet at shamblin at 4:00. sound good? If anyone wants to help unload be at my house at 5:00

Saturday Morning:
Who: Beane and Cody
What: Second load of rock. Beane i'll call ya and talk about what time we wanna go.

Saturday afternoon:
Who:Cody, JBeane, Killswitch, Aaron, OneBdGTI (maybe), Phantom RS10, moparguy
What: Placing pallets, build substructure, rough course design / rock placement
When: If you want to help out plan on being at my house in hurricane at noon. Bring whatever materials you have handy that you think we can use to build the course. Rope, wide straps, wood, tarps, others materials, etc. Bring your own beer if you want. I may order some pizza's if we get hungry. Bring your rigs and chargers i have plenty of power sockets out there.

Sunday Afternoon:
Who: Cody, Beane, Aaron, Killswitch, AxialChevy, OneBdGti, Phantomrs10
What: Course development, probably by this time we should be ready for some initial testing of lines. Were gonna need trucks of all capabilities.
When: Plan on being at my house at 2:00pm. Bring your rigs and Beer if you want also.

Click here for directions to my house.

Please bring your rigs when you come. We are gonna need testers throughout the design and build process. I have a fridge in the garage for beer if you bring it or food.

If you plan on coming please post and i will put a roster up here for each day. I'd like to have 4 or 5 a day on Sat and Sunday if we can.
 
Last edited:
I'm gonna try to make it Saturday and Sunday. Sunday I'm out of there by 530, though... can't miss the super bowl since I'm a die hard Steelers fan.
 
I'm gonna try to make it Saturday and Sunday. Sunday I'm out of there by 530, though... can't miss the super bowl since I'm a die hard Steelers fan.

Yeah we will call it about 5 probably on sunday unless people just want to stay. Looking forward to see you again Jimmy.


Oh and Jimmy...... i want one of those cabs.....;)
 
Last edited:
Cool guys. I'm going to have some decals for everyone that helps build the park. They should be here Tomorrow. Nice little piece for your rig. Once were u p and running more will be for sale. T-Shirts are being designed also.
 
Back
Top