Servo Horn? 25T

[SMFtwstdHICK]

So,

I was wondering who was using what kind of servo horns for their Ascender? Aftermarket horns. But, using the stock setup for the Ascender. I have a Savox servo and I need a 25t horn.

I can't seem to find any that will work?

 

[Yeti.stealth]

I have a savox servo and just used one of the spare plastic horns that came with the RTR blazer tool kit, I think there was 3 horns and all with different tooth count.

 

[svt923]

I use a Tekno servo horn. It is very low profile and solved my problem of the servo horn hitting the drag link.

TowerHobbies.com | Tekno RC Aluminum Servo Horn Double Hole 25T Spline

 

[SMFtwstdHICK]

I have a savox servo and just used one of the spare plastic horns that came with the RTR blazer tool kit, I think there was 3 horns and all with different tooth count.

I am using that one on my first Ascender. Can't seem to find any replacement ones.

 

[SMFtwstdHICK]

I use a Tekno servo horn. It is very low profile and solved my problem of the servo horn hitting the drag link.

TowerHobbies.com | Tekno RC Aluminum Servo Horn Double Hole 25T Spline

Does that hook up to the stock linkage? May look into that one. Thanks.

 

[svt923]

Does that hook up to the stock linkage? May look into that one. Thanks.

You have to replace the threaded ball that goes into the stock servo horn with a regular rod end ball since the Tekno horn uses a countersunk screw and nut to hold the linkage on.

 

[Natedog]

I'm using Dynamite non-clamping aluminum horn, works great and never a problem on any of my 1.9s even driving like crazy at Axialfest.
https://www.amainhobbies.com/dynami...yn2530/p4969?gclid=CJXdxrXZgNECFQt_fgodJpgM6w

Sometimes I put the linkage on top of the arm, sometimes under, depends on the setup.


I also have Hudy aluminum arm which is super sweet low profile! It actually offsets the arm closer to the servo than I've ever seen, very quality unit.

HUDY

 

[SMFtwstdHICK]

Right on, Thanks for the help and info guys.. "thumbsup"

 

[rag6]

I am currently using a cut down servo arm from my erevo. Working great so far