finally got the right motor mount for my grom project, should kept the stock electronics in it lol
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Pics of your latest purchase
- Thread starter Wehan
- Start date
Leaf mounts for 3 upcoming builds, and WhoopaCabra V2 rails. All thanks to Scale Metal Supplies. Let's continue to collect parts and have not enough time.
Need to make a Bog Filter for the Duck Pool.
Picked up a few things to get that working.
A pump, some Uniseals. 2 in 1 1/2 in and 1 1/4 in unsure what piping I'll end up going with. Probably 1 1/2 feed and 1 or 2 2in drains going back to the pool.
Some filter medium to help create some good bios and get rid of the nitrogen (what the algea eats but it can't keep up at all).
Some other filter medium is showing up tomorrow.
Also got a few parts, ball valvle, some elbows and a few tees etc. Need to get a bit of 2 inch and 1 1/2 inch pvc pipe to put it all together. Pics after its put together.
Picked up a few things to get that working.
A pump, some Uniseals. 2 in 1 1/2 in and 1 1/4 in unsure what piping I'll end up going with. Probably 1 1/2 feed and 1 or 2 2in drains going back to the pool.
Some filter medium to help create some good bios and get rid of the nitrogen (what the algea eats but it can't keep up at all).
Some other filter medium is showing up tomorrow.
Also got a few parts, ball valvle, some elbows and a few tees etc. Need to get a bit of 2 inch and 1 1/2 inch pvc pipe to put it all together. Pics after its put together.
Not the sexiest picture of a chick I've seen but very cool nonetheless. Them ducks be living it up for sure! Sounds like an excellent set-up. Algae blooms can be a headache to deal with. I only worked rec pools where things like ducks weren't a concern.... just balancing chlorine or salt for the right ph, etc. But lack of maintenance especially neglecting filters/ pumps was the most common fail that I used to see. Have to monitor and keep clean/ balanced for any hope of warding off the summer slime.
RudyF6
Pebble Pounder
MMMM.....
Hungry now!!
Hungry now!!
cul8tr
Rock Crawler
B-MOW71 Is this your first time using those shafts? I've considered trying them.
Yes it is. They seem to be good quality. They have a short spline area, so I’m hoping they won’t separate.
Speaking of Drifter's
YATO MADE ME DO IT.
!!!
Redcat RDS.... Fun build. I got to dig some old pictures of the 240sx project I had 16+ years ago, it really sharpened my teeth mechanically and was such a rewarding experience! That is the body that will live in this build.
YATO MADE ME DO IT.
!!!Redcat RDS.... Fun build. I got to dig some old pictures of the 240sx project I had 16+ years ago, it really sharpened my teeth mechanically and was such a rewarding experience! That is the body that will live in this build.
Last edited:
VoltSCX
Quarry Creeper
You got those for a Gladiator? Those look like they're for a Wrangler or other 313mm WB 10.3, I got the same for mine and the rear was wayyyy too short. GPM Racing has an actual proper set for the Gladiator that looks like it'll fit.
SCX10iii Gladiator drive shafts
Last edited:
Custom bumper order came in. Unfortunately, all 3 aren't the requested widths. We'll see how this plays out...
What do you think of the quality of the kit?Speaking of Drifter's
View attachment 511615
View attachment 511616
YATO MADE ME DO IT.
Redcat RDS.... Fun build. I got to dig some old pictures of the 240sx project I had 16+ years ago, it really sharpened my teeth mechanically and was such a rewarding experience! That is the body that will live in this build.
