You're welcome. I have been there once. I have a friend that goes yearly with his Tamiya semi trucks. Apparently people come from all over the world including Canada, Europe and even Brazil!
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
1/10 GMC PD-4501 Greyhound Scenicruiser Bus 3D Printed Build
- Thread starter orange617
- Start date
orange617
Pebble Pounder
thank you, i have here the link to my IMGBB page of this build in case you guys want to check out pictures from the first print to full assembly....jaw dropping builds I see here, impressive to say the least
A-13_1954 GMC PD-4501 GREYHOUND SCENICRUISER BUS
A-13_1954 GMC PD-4501 GREYHOUND SCENICRUISER BUS album hosted in ImgBB
ibb.co
orange617
Pebble Pounder
that sounds fun, im curios about the builds that i would see there... i will try next year.... is this a once a year event? if i may ask...thanks
It is a once-a-year event and, unfortunately, you just missed it. This year's was January 17-18. I think it is always in January.
It is much more than RC with a bunch of steam engines and other stuff that mechanical guys should love. There are plenty of videos on YouTube.
Here are some videos of the RC stuff:
Knytemare
Rock Crawler
Wow that is amazing! Can't wait to see it completed. Fantastic work so far!
orange617
Pebble Pounder
thank you.
orange617
Pebble Pounder
i like to do painting on each piece as much as i can and put them back afterwards, adds to the realism.. easier to air brush when in pieces.
Peterbiltje
Newbie
Dear Sir,
In the attic I found a box with tires- rims- axes- chassis .... at 1:8 scale.
Now as I see your beautiful project at 1:10 of the legendary pd 4501 and I was thrilled to make a body for all the stuff taking dust and make something nice.
The lenght of the bus should be 1524 mm - height 425.5 mm - width 305 mm
Tires diameter = 140 mm
I own 2 Bambu Lab P1S combo printers.
So there is my question: Is it possible to buy the files from you of the pd 4501 bus ?
I know your bus is 1:10, so I convert in to 1:8
I am from Belgium
If your answer is positive , tell me how much you want for the files.
Best regards,
Peter
In the attic I found a box with tires- rims- axes- chassis .... at 1:8 scale.
Now as I see your beautiful project at 1:10 of the legendary pd 4501 and I was thrilled to make a body for all the stuff taking dust and make something nice.
The lenght of the bus should be 1524 mm - height 425.5 mm - width 305 mm
Tires diameter = 140 mm
I own 2 Bambu Lab P1S combo printers.
So there is my question: Is it possible to buy the files from you of the pd 4501 bus ?
I know your bus is 1:10, so I convert in to 1:8
I am from Belgium
If your answer is positive , tell me how much you want for the files.
Best regards,
Peter
