-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
2012-2013 Rock Hard 1.9 Scaler Series Info Page
- Thread starter JRock
- Start date
finishline
RCC Addict
Meeting adjourned!
finishline
RCC Addict
"thumbsup"
Last edited:
JRock
RCC Addict
Last edited:
BUTTERS_209
Pebble Pounder
Is it the lack of fresh air? :lmao: I'm just messin with you bro. :mrgreen: But i'd love for you and Spence to come out more, it's always a good time when you come out, but I totally understand! "thumbsup" But we really all should try to get together for a club meeting or something on a regular basis. "thumbsup" :mrgreen:
Last edited:
BUTTERS_209
Pebble Pounder
Just about a month to go fellas! I got the new season's body started last night. Here's a little teaser... It's gonna be green. :shock: :lmao:
JRock
RCC Addict
Were getting closer to what is going to be one of the best seasons to date:mrgreen:
We have a special location for the final event and it should live up to it's name but no hints till later in the season as we need to make sure it's going to be alright but all I can say is it's on 40 acres near a spot we always crawl:roll:;-)
We have a special location for the final event and it should live up to it's name but no hints till later in the season as we need to make sure it's going to be alright but all I can say is it's on 40 acres near a spot we always crawl:roll:;-)
Meatwad
I wanna be Dave
I require an opinion from the event organizers/judges and the collective. Planning on running a 1.9 wraith which is currently a W.I.P. that meets all of class2 requirements but one.. chassis rails.
Yay or nay? I do understand that overlooking one rule can be like overlooking the entire rulebook so don't feel bad about a nay, there is a plan B!
Yay or nay? I do understand that overlooking one rule can be like overlooking the entire rulebook so don't feel bad about a nay, there is a plan B!
finishline
RCC Addict
I originally thought it was ok but after reading the rules again I'm not to sure. As a matter of fact I was planning on running a Wraith chassis my self but wasn't able to get one in enough time o switch it all over. What is your thoughts J?
A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework.
Tube bed, roll bar, internal cage, and shock mounts points not available in addition to tuber points.
Here is the link to specs: http://www.rccrawler.com/forum/scale-comp-rules/367585-2012-sorcca-scale-rules.html
A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework.
Tube bed, roll bar, internal cage, and shock mounts points not available in addition to tuber points.
Here is the link to specs: http://www.rccrawler.com/forum/scale-comp-rules/367585-2012-sorcca-scale-rules.html
Last edited:
Meatwad
I wanna be Dave
Yep thats what my interpretation was too, that a tuber of any material automagically makes it class3. And being that class2 is "trail" its not really in the spirit of the class. Just thought I'd run it by the community.
JRock
RCC Addict
Meatwad I don't have a wraith so can you tell me do these have chassis rails? Do the shocks mount to the cage or chassis if there is one?
Because this rig has a full body on it I think it might fit in but i'll go back over everything to make sure"thumbsup"
Because this rig has a full body on it I think it might fit in but i'll go back over everything to make sure"thumbsup"
Meatwad
I wanna be Dave
Not chassis rails in the traditional sense, its all plastic with some flatted parts to mount the skid. Shocks connect to the cage. I'll post up some random pics of the cage minus body panels that can explain better than my words :mrgreen:
JRock I have no problem going to an scx chassis, got a "wroncho" as my ttc/class3 rig that will make a good switcheroo. I don't wanna be "that guy" :lmao:
Not my pic but a decent one of the cage...
JRock I have no problem going to an scx chassis, got a "wroncho" as my ttc/class3 rig that will make a good switcheroo. I don't wanna be "that guy" :lmao:
Not my pic but a decent one of the cage...
Last edited:
JRock
RCC Addict
I don't really see a problem other then not having chassis rails so I suggest throwing up a question up in the scale rules section just too see what is said about running a wraith tube chassis in class 2.
I couldn't find any conversations on the subject so I would say give it a shot and see what they say"thumbsup" If not you have a backup plan lol.
I couldn't find any conversations on the subject so I would say give it a shot and see what they say"thumbsup" If not you have a backup plan lol.
finishline
RCC Addict
Well good thing I didn't change my rig over, cause then I would have been that guy:shock:
Postclanker
I wanna be Dave
Lol....only wish there was a class just for the wraith.
I take it not many in your club have them???
Look forward to running the series with you guys...."thumbsup"
I take it not many in your club have them???
Look forward to running the series with you guys...."thumbsup"
finishline
RCC Addict
Maybe 1-2 wraiths,looking foward to meeting and comping with you too"thumbsup"
Postclanker
I wanna be Dave
maybe we could get others interested in the wraith as well...make up a wraith class....just a thought...
only have one entry right now, class 2 rig coz my tires are 4.5" tall. Never comped before, but definately looking forward to it.
only have one entry right now, class 2 rig coz my tires are 4.5" tall. Never comped before, but definately looking forward to it.
finishline
RCC Addict
It's a possibility that we run a class 3 in th future who knows.
Postclanker
I wanna be Dave
I would run that..."thumbsup"
