mikemcE
I wanna be Dave
Last edited:
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
3d printer for rc parts
- Thread starter Desmo
- Start date
MaxxPain
Rock Crawler
Yes, pretty cool kit. I still trying to get use to driving it. I tend to forget which way does what.
Panther6834
I wanna be Dave
On your Tx, did you remember to reverse the steering servo channel? With traditional front steering, left is left, and right is right. But, with rear steering, left is right so that it turns left, and right is left so that it turns right.
~ More peace, love, laughter, & kindness would make the world a MUCH better place
MaxxPain
Rock Crawler
I did reverse it and I found it didn't completely solve my problem. I have the steering and throttle on the right stick. Up and down and Tilt on the left stick. Then, if you happen to have a Tamiya Rig with the MFU Sound kit, you have to remember all those stick moves. I think more seat time will solve it.
Kingmeow
Quarry Creeper
WHOA! Real hydrolics!!! No wonder the big bucks!
https://www.rclesu.com/index.php?c=content&a=show&id=449
mikemcE
I wanna be Dave
Lesu details are incredible.
Always a top shelf build!
Do you have a build thread?
Hang up and Drive
Always a top shelf build!
Do you have a build thread?
Hang up and Drive
Panther6834
I wanna be Dave
I wish I could remember what YouTube channel, but someone did a multi-episode build of a Lesu forklift. Not my thing...but, the actual buildin of it looked cool.
~ More peace, love, laughter, & kindness would make the world a MUCH better place
~ More peace, love, laughter, & kindness would make the world a MUCH better place
mikemcE
I wanna be Dave
Panther6834
I wanna be Dave
BINGO!!! That's it...thanks for the assistance/reminder.
~ More peace, love, laughter, & kindness would make the world a MUCH better place
MaxxPain
Rock Crawler
I have some video when I first got it together. I didn't do a build thread. I should of thinking about all the stuff/questions I tracked down. The RC Sparks video was super helpful. Especially programing the remote. I made another version to the pallet and added side loading openings. I print these upside down and now noticed the right corner is lifting just a tad on the print bed.
<iframe src="https://www.youtube.com/embed/ZpB5cScz898" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>
<iframe src="https://www.youtube.com/embed/ZpB5cScz898" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>
I just bought a Ender 3 v2 too. You'll like it. My bed wouldn't stay level so I upgraded bed springs.
I use Prusa Slicer and the Ender 3 profile that comes with it.
The directions leave a little to be desired as far as assembly goes. I'd suggest watching a YT video. This one is for the Ender 3 but still pertains to the v2 https://youtu.be/dQ0q9zLygTY
MaxxPain
Rock Crawler
Found this cool IBC container on Thingiverse. Took about 20hrs to print. The cage had so much support, I found going slow was the best way to remove it all cleanly. Fits the forklift perfect. My son liked it so much he wanted a 2nd one with a red tank. Gonna need a killer Pallet rack soon.
Last edited:
Found this cool IBC container on Thingiverse. Took about 20hrs to print. The cage had so much support, I found going slow was the best way to remove it all cleanly. Fits the forklift perfect. My son liked it so much he wanted a 2nd one with a red tank. Gonna need a killer Pallet rack soon.
That is awesome!
Sent from my iPad using Tapatalk
