45t motors in the rs10, i have done it

[Beaufairbrother]

I've seen countless posts videos and comments about this. But no actual results. This angers me. I had to drill into the gearbox but it works perfectly. And it was not difficult by any means. And pictures are up on my instagram under the hashtag #rs1045t so you can see it.

 

[cabron]

any chance of pictures here?

 

[tapped-out]

X2 post pictures here...

 

[The Jackalope]

are these 540 size motors? or 370-390 motors like the stock ones?

i ran the $10 RC4WD 45t sealed cans on mine for a couple years. i had them mounted on the old "Big Boy" kits, back when they were available. but many guys have drilled out they're own cases to fit 540's just fine. I found the 45t in this size to be near identical to the stockers for speed, but a whopping boat load more torque!

 

[Beaufairbrother]

Howwwww do i post these damn photos

 

[The Jackalope]

RCcrawler doesn't "host" pictures. You need to post them somewhere else on the interwebs, then copy the link into your post to get them to show up. I use "photobucket.com" to post and store pictures. But there are many other places to do this.

 

[Beaufairbrother]

 

[Beaufairbrother]

Thanks for that advice lol im a noob here and to the rc world

 

[Beaufairbrother]

 

[cabron]

rc crawler does host pictures,
you have to go advanced for the reply and in there is a section to upload pictures
been doing it for years. it is under file attachments.

 

[P.A.Myers]

I used a 'Dynamit 540 15t'. Fits as is, much more power.

 

[cabron]

pamyers they are talking about the rs10 not the Everest. hahahaha

 

[P.A.Myers]

nevermind....