• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho

I've beat the hell out of mine with the ROC412 on 3S, i even broke one of the Ti link's Traxxas rod end in half and still works with no problems at all, i'm very happy with it
 
I Broke my rear output last weekend , I Bought a spare of Martin @rcbits for £15 and have a HD version on the way . It was broke doing very light 3s driving on my Pro 4 3300 kv system . Really annoyed at it to be honest . I've just broke my ax10 cvd's on 50t too .
Anything Rc4wd can do by any chance as i'm now £15 down and soon to be £30
Please Pm me for my Email or just use the Pm system .
Hope you can help
Jack
 
What are these things rated for?
Seems that the broken ones are all coming from high powered motors.
 
Last edited:
cushdog58 said:
ok i busted mine! the output shaft on the front side snaped today crawlin in low gear not even on it!.i emailed rc4wd but thought i would post up here also.pro4 on 3s but like i said was just crawlin!pics to come soon!!
Click to expand...

Tzi said:
What are these things rated for?
Seems that the broken ones are all coming from high powered motors.
Click to expand...
Its stated nowhere . Mr stock output seemed to be drilled bigger than axial however the replacement isn't
Its a good point but with full VP axles and MIPs these seem to be the weakpoint
Jack
 
I'll be running mine front mounted to a transfer case.. So, the Pro4 4000 power will all be channeled through one output on the AX2 transmission. I'm hoping it works out.
 
Any ETA on when the HD output shafts for these trans will be out? Broke mines also and ever since putting the two speed trans in my rig and having to go back to a single speed its killing me while I wait for a replacement lol. I need the speed !!
 
I didn't see anyone ask but on rc4wd website it says mods maybe need to us this tranny on a scx10...what mods have yall guys done to get this to work on the scx10???
 
Is the AX2 still avail.? or just on wicked backorder? Not in any stores inventory lately. wondering if they have been pulled till the output shafts have been upgraded - if not, maybe now is a good time to do so :)

nevermind- just ordered one from www.hobbyetc.com in NH :)
 
Last edited:
The HD output shaft is available on the rc4wd website. I've got mine ready to go just need to out it in.

For an alternative to get a dust cover on. I took one of the new supershafty motor plates for axial transmissions (the ones with built in dust cover mount). Lined it up with the stock ax2 motor plate and drilled new holes. Added a counter sink. It works awesome. It's a HD plate and I have the dust cover. I had to use a gen3 slash slipper to fit under the cover. Luckily the bigger pin size for that slipper is the same that is already in the ax2 spur shaft.
 
You must log in or register to reply here.

Similar threads

R
Hypothetically: Trail Honcho SCX10 vs SCX10.2
2
Replies
37
Views
4K
Reezo
R
R
Axial SCX10 II Honcho using Door Handles, Wipers and Mirrors from the Base Camp Kit. It works!
Replies
4
Views
202
Reezo
R
R
Axial Wraith rebuild. (Very loud can’t mesh fix)
Replies
7
Views
301
Gula
Gula
A
Capra build
Replies
4
Views
2K
atyler14
A
W
trx4m F150 high trail with flipped fcx24 2 speed transmission
Replies
1
Views
914
Whats_a_dickfer
W
Back
Top