axial scx10 stock esc qeustion ?

[crawlermadness]

Hi guys i have the stock scx10 esc . i have been running it since i got the truck but all of a sudden its tweaking out. It drives forward just fine but when i go to reverse it doesnt do a thing in less i am full throttle. why is this? should i just get a new esc? i still have the stock radio and transmitter is it possible that its just the radio?? if any one could help i would be appreciative???
i was think about the tekin fxr with the 35 turn if i have to replace stock esc again please help

 

[It usually runs fine]

double check your tx settings and if they are good recalibrate your esc.

 

[crawlermadness]

double check your tx settings and if they are good recalibrate your esc.

how do i do that? thats what i thought somthing just is tweaking out and i just need to reset it somhow do you know i can do this?

 

[forbid89]

If you have the AE-1 ESC then follow these instructions:

http://docs.axialracing.com/instructions/ax24250-i001-ae1-esc.pdf

if you have the AE-2 esc follow these instructions for calibration:

http://docs.axialracing.com/instructions/ax24259-i001-ae2-esc.pdf


You didn't get the ESC wet did you? If calibration fails to correct your problem then give axial a call, they have great customer service.

 

[crawlermadness]

If you have the AE-1 ESC then follow these instructions:

http://docs.axialracing.com/instructions/ax24250-i001-ae1-esc.pdf

if you have the AE-2 esc follow these instructions for calibration:

http://docs.axialracing.com/instructions/ax24259-i001-ae2-esc.pdf


You didn't get the ESC wet did you? If calibration fails to correct your problem then give axial a call, they have great customer service.

thank you for your help i did try that and that still doesnt work i can get it to work for 30 seconds or so after turning on the esc then it quits. I will try to contact axial to see what they have to say. if any one else has any suggestions please feal free to post !

 

[crawlermadness]

i did that and it will work for 30 seconds and then it will stop i can drive forward but i cannot go in reverse should i just replace the esc. is that what it is forsure thats what iam wondering cuase if it is ill just pick up a tekin combo